4.Confirm that "ON" is selected at "DGPS MODE" field for
5.Select "BEACON BAUD RATE" by the arrow key.
6.Press the software key labeled "EDIT" to display the following message.
BEACON BAUD RATE
▲
200
'100
50
▼
Figure 3-6 Beacon Baud Rate Display
7.Select beacon baud rate corresponding to DGPS reference station to use.
8.Press the [ENTER] key.
9.Press the [PLOT] key to finish.
3.5Beacon Frequency Setting (GP-1850D only)
1.Press the [MENU] key.
2.Press the software key labeled "GPS/DGPS/TD OPTIONS".
3.Press the software key labeled "DGPS SETUP OPTIONS" to display the fol- lowing message.
s FORMAT | NMEA | DGPS | |
OPTION | |||
DGPS MODE | ON | ||
BEACON FREQUENCY | AUTO |
| |
sBEACON BAUD RATE | AUTO |
| |
DGPS ALARM | OFF | EDIT | |
|
| ||
DGPS 3D |
| RETURN | |
|
| ||
Figure |
| ||
|
| ||