Pioneer DEH-600BT operation manual Tuner, Adjusting the volume, Basic Operations

Operating this unit

Adjusting the volume	Tuner
% Turn MULTI-CONTROL to adjust the	Basic Operations
sound level.	% Select a band
	Press BAND/ESC.
	# Band can be selected from among FM1, FM2,
	FM3 or MW/LW.
	% Manual tuning (step by step)
	Push MULTI-CONTROL left or right.
	% Seek tuning
	Push and hold MULTI-CONTROL left or right,
	and then release.
	# You can cancel seek tuning by pushing
	MULTI-CONTROL left or right.
	# While pushing and holding MULTI-CONTROL
	left or right, you can skip stations. Seek tuning
	starts as soon as you release MULTI-CONTROL.
	Notes
	! This unit’s AF (alternative frequencies search)
	function can be turned on and off. AF should
	be off for normal tuning operation (refer to
	page 13).
	! RDS service may not be provided by all sta-
	tions.
	! RDS functions such as AF and TA are only ac-
	tive when your radio is tuned to an RDS sta-
	tion.

Section

02

Operating this unit

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number. Press and hold to store.

En 11