Section
02Operating this unit
Bluetooth Audio | Using a Bluetooth audio player to |
| initiate a connection |
Important
!Depending on the Bluetooth audio player con- nected to this unit, the operations available with this unit are limited to the following two levels:
—Lower level: Only playing back songs on your audio player is possible.
—Higher level: Playing back, pausing, select- ing songs, etc., are possible (all the opera- tions illustrated in this manual).
!Since there are a number of Bluetooth audio players available on the market, operations with your Bluetooth audio player using this unit vary extensively. Refer to the instruction manual that came with your Bluetooth audio player as well as this manual while operating your player on this unit.
!Information about songs (e.g. the elapsed playing time, song title, song index, etc.) can- not be displayed on this unit.
!While you are listening to songs on your Blue- tooth audio player, refrain from using on your cellular phone as much as possible. If you use your cellular phone, the signal from your cel- lular phone may cause noise on the song play- back.
!When you are talking on a cellular phone con- nected to this unit via Bluetooth wireless tech- nology, song playback from your Bluetooth audio player connected to this unit is muted.
!Even if you are listening to a song on your Bluetooth audio player and you switch to an- other source, song playback continues.
1Press
2Use
CONNECTION.
Turn to change the menu option. Press to se-
lect.
# You can also select this menu by pressing and holding PHONE//CONNECT on the ordinary display.
3Turn
BT AUDIO DEVICE.
#If there is previous connection log in this unit, you can select the Bluetooth device from
PAIRED DEVICE.
Refer to Connecting a paired Bluetooth audio player.
4Use
NOKIA
# Normally select STANDARD. If the device of
Nokia is not paired to this unit, select NOKIA.
# Push
5Press
READY will be displayed.
# This unit is now on standby for connection
from Bluetooth audio player.
# Push
Connecting a Bluetooth audio player
!Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documenta- tion. Refer to Entering PIN code for Blue- tooth wireless connection on page 43.
6Use your Bluetooth audio player to es- tablish connection.
PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 43.
While connecting, CONNECTING is displayed. If the connection is established, CONNECTED is displayed.
20 En