Section
02Operating this unit
3Use
Turn to change the station. Press to select.
# You can also change the station by pushing
# To return to the ordinary display, press
BAND/ESC or LIST.
# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.
Receiving PTY alarm broadcasts
When the emergency PTY code broadcasts, the unit receives it automatically (ALARM ap- pears). When the broadcasting ends, the sys- tem returns to the previous source.
!An emergency announcement can be can- celed by pressing TA.
The function menu is displayed.
3Turn
BSM (best stations
Notes
!To return to the ordinary display, press BAND/ESC.
!If MW/LW band is selected, you can only se- lect BSM or LOCAL.
Storing the strongest broadcast frequencies
Switching the RDS display
When you tune in an RDS station its program service name is displayed. Switch the display to find out the frequency.
%Press DISP.
Press DISP repeatedly to switch between the following settings:
Program service
PTY (program type ID code) information is listed on page 15.
#PTY information and the frequency of the cur- rent station appears on the display for eight sec- onds.
Introduction to advanced operations
1Press
2Use
FUNCTION.
Turn to change the menu option. Press to se- lect.
BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies.
1 Display the function menu.
Refer to Introduction to advanced operations on this page.
2Use
3Press
stored in the order of their signal strength.
# To cancel, press
Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.
1 Display the function menu.
Refer to Introduction to advanced operations on this page.
2Use
12 En