Operating this unit
Section
02
3Push
4Press
5After entering the ID and password, use your cellular phone to continue the procedure.
Transferring entries to the phone book
Phone books in your cellular phone can be transferred to this unit by using your cellular phone.
!400 entries for each user (max. 3 users) can be stored in the phone book. Each indepen- dent entry can hold three phone numbers and genres.
1 Display the function menu.
Refer to Introduction to advanced operations on page 31.
2Use
PH BOOK TRANSFER.
3Press
4Use the cellular phone to perform phone book transfer.
Perform phone book transfer using the cellu- lar phone. For detailed instructions, refer to the instruction manual that came with your cellular phone.
When phone book transfer is completed,
DATA TRANSFERRED is displayed.
# The display indicates how many entries have been transferred and the total number to be transferred.
place automatically as soon as the two devices are less than a few meters apart.
!With some cellular phones, it may not be possible to perform the automatic connec- tion.
1 Display the function menu.
Refer to Introduction to advanced operations on page 31.
2Use
AUTO CONNECT.
3Press
matic connection on.
# To turn automatic connection off, press
Note
Automatic connection is performed in the regis- tration number order.
Setting automatic answering
1 Display the function menu.
Refer to Introduction to advanced operations on page 31.
2Use
AUTO ANSWER.
3Press
matic answering on.
# To turn automatic answering function off, press
Echo canceling and noise reduction
1 Display the function menu.
Refer to Introduction to advanced operations on page 31.
2Use
ECHO CANCEL.
Operating this unit
Setting the automatic connection
It is possible to set the automatic connection between your cellular phone and this unit. If this function is set to on, connection between your cellular phone and this unit will take
3Push
OFF
En 33