Using preset numbers, Assigning preset numbers

Section

02Operating this unit

Clearing a phone book entry

1Display the phone number list of your desired phone book entry.

See step 1 to 5 on Calling a number in the phone book on page 28 for how to do this.

2Press and hold MULTI-CONTROL to dis- play the edit screen.

3Turn MULTI-CONTROL to display

CLR MEMO (clear memory screen). Turning MULTI-CONTROL switches input screens in the following order:

EDIT NUMBER (number edit screen)—

EDIT GENRE (genre edit screen)—CLR MEMO (clear memory screen)

4Push MULTI-CONTROL right to show a confirmation display.

CLEAR MEMORY YES is displayed.

# If you do not want to clear the memory that you have selected, push MULTI-CONTROL left.

In this case, press and hold DISP to scroll the name.

#You can also change the phone number by pushing MULTI-CONTROL up or down.

3Press MULTI-CONTROL to select a preset number that you want to assign a phone number to.

4Press and hold MULTI-CONTROL to dis- play MEMORY.

Push MULTI-CONTROL up or down to switch

MEMORY (memory) and DELETE (delete).

# If a phone number is already stored in the se- lected preset number, the new phone number will

overwrite the old one.

# For details on deleting, refer to Deleting preset numbers on the next page.

5Select MEMORY and then press

MULTI-CONTROL to display the phone book.

The display reverts to normal.

5Press MULTI-CONTROL to delete the Phone Book entry.

The Phone Book entry is deleted and CLEARED is displayed. The display returns to Phone Book entry list.

Using preset numbers

Numbers that you dial frequently can be as- signed to presets for quick recall.

Assigning preset numbers

1Press LIST to display DIAL PRESET (pre- set number list).

Refer to Using the phone number list on page

2Turn MULTI-CONTROL to switch preset numbers.

You can select preset number from 1 to 10.

# Press and hold DISP to scroll the phone num-

ber.

# If the phone number is already in the phone book, the corresponding name is displayed.

6Turn MULTI-CONTROL to select the first

letter of the name you are looking for.

# You can also perform the same operation by pushing MULTI-CONTROL up or down.

7Press MULTI-CONTROL to display en- tries.

The display shows the first three Phone Book entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is selected).

8Turn MULTI-CONTROL to select a phone book entry you want to store in the preset

list.

# You can also perform the same operation by

pushing MULTI-CONTROL up or down.

# You can scroll literal information by pressing and holding DISP.

9Press MULTI-CONTROL to display the

phone number list of the selected entry.

# You can also display the phone number list of the selected entry by pushing MULTI-CONTROL

right.

# If several phone numbers are included in an entry, select one by turning MULTI-CONTROL.

30 En