To change the sub filter setting:
1.Press the Menu key.
2. Turn and then press the Rotary Encoder to select Settings > Sub filter.
3.Turn the Rotary Encoder to select the required filter frequency.
4.Press the Rotary Encoder to save the setting and exit.
5.Press any key to exit
Key sound
The 700 Series makes a short beeping sound when any key is pressed. This feature can be turned on or off, as required.
To enable or disable the key sound:
1.Press the Menu key.
2.Turn and then press the Rotary Encoder to select Settings > Key sound.
3.Press the Rotary Encoder to turn on key sound (audible beeps) ( 
)
or turn off key sound (silent) ( 
)
4.Press any key to exit
Language
The 700 Series can display menus and screens in English, Dutch, French, German, Italian or Spanish.
To select the required display language:
1.Press the Menu key.
2.Turn and then press the Encoder to select Settings > Language.
3.Turn the Encoder to select the required language.
4.Press the Encoder to save the setting and exit.
5.Press any key to exit
Power save
If you are operating the 700 Series on battery power, you can turn on the power save option to reduce drain on the battery. The LCD screen shuts down automatically after 1 minute of inactivity (press any key to restore display).
To enable or disable power saving mode:
1.Press the Menu key.
2.Turn and then press the Encoder to select Settings > Power save.
3.Press the Encoder to turn on power saving ( 
)
or turn off power saving ( 
).
4.Press any key to exit
SiriusXM
An example of the SiriusXM input source screen is shown in Figure 3 below.
Figure 3 – Example SiriusXM input source screen
|
|
|
|
|
| Input Source name |
|
|
|
|
|
| |
Current time |
|
|
|
|
| Signal strength |
|
|
|
Artist, title, 
content information (if available)
Category name 
Channel name |
|
|
| Channel number |
|
|
Tuning mode
TUNING METHODS
You can use three methods to tune the 700 Series: manual, automatic and preset.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Encoder | Menu key | Play / | Rewind | Fast | ||||
|
| Pause |
|
| Forward | |||
|
|
|
|
|
|
|
|
|
To tune to a required frequency, channel or preset:
Press the Play / Pause key to step through the available tuning methods for each band:
Note: Preset function only available if 2 or more presets are saved
55 | 16 |