Fusion MS-IP700, MS-AV700 specifications Selecting audio tracks from USB flash drive

USB SOURCE SCREEN

An example of a typical USB flash drive input source screen is shown in Figure 5 below.

Figure 5 – Example USB flash drive source screen

Current time	Play status indicator
Current track
details	Playback mode
	indicator:
Current track	Shuffle	Repeat
	(if active)
number out of total
number in folder	Progress bar
Elapsed time	Track Duration

CONTROLLING USB FLASH DRIVE PLAYBACK

Selecting audio tracks from USB flash drive

You can store audio tracks (MP3 format only) on a USB flash drive for playback on the 700 Series. Audio tracks can be stored in folders on the flash drive and selected for playback, as required. The flash drive must be formatted to FAT32 or NTFS format (these are the most commonly used flash drive format).

For example, to select a Folder then track.:

To connect your iPod or USB flash drive to the 700 Series via a MS-DKIPUSB dock:

1.Press the door catch and open the door of the dock.

Portable media device dock

(MS-DKIPUSB)

2.Insert your USB flash drive into the USB connector or insert your iPod in its correct sleeve. Make sure that the device is firmly pushed onto the connector socket.

3.Close the door firmly.

4.Select input from the device, as required.

To connect your iPod to the 700 Series via an Apple Sync cable (AV700 only):

1.Plug the USB plug of your Sync Cable into the USB socket of the external USB cable on the MS-AV700.

2.Connect your iPod or iPhone to the 30-pin Connector of your Apple Sync Cable.

3.Select input from the device, as required.

Press	If your flash drive	Press Encoder to	Turn Rotary
Menu key	has not been	select KINGSTON.	Encoder to scroll
	named, the default Files and folders on		the highlight.
	name is disk.	the flash drive are	Press Encoder to:
		displayed.	• select Folder
			then track for
			playback.

Menu

exit. See

“Menu Key Operation” on page 6.

25 46