Fusion MS-IP700 specifications MS-AV700 model only, Selecting and setting up a zone, Enabled

INFRARED (IR) REMOTE

MS-AV700 model only

You can use the IR remote to navigate through most functions in all sources

The following keys work the same way as the matching Head unit keys in all

sources.

Power On / Off	Mute all sound
Play / Pause	Display clock
Skip back	Skip forward

The following keys work the same way in all sources.

Change source

Volume Up / Down

SETTING UP THE 700 SERIES

ZONES

Zone 1 and 2 are powered by the on board Class-D amplifier. External amplifiers are required to utilize the 4 line outputs and 4 subwoofer outputs. You can pre-set the balance, volume limit, sub-woofer level and name for each of the four Zones available on the 700 Series. If required, you can also:

•Enable or disable Zones 2, 3 and 4 (Zone 1 is always enabled).

•Enable or disable volume control (Zones 3 and 4 only).

•Link Zones 1 and 2.

For further details, see instructions below.

Rotary	Menu key
Encoder

Selecting and setting up a zone

To select a Zone and modify its settings:

1. Press the Menu key.

2. Turn and then press the Encoder to select Settings > Zone.

3.Turn and then press the Encoder to select the Zone you wish to work with.

4.Use any of the following instructions to update settings for the selected Zone.

Enabled

Zones 2–4 can be disabled if required. This is useful, for example, if only two Zones have been set up, as disabled Zones are not displayed in any screens when setting levels.

To enable or disable the selected Zone:

a.Select the Enabled menu item.

b.Press the Encoder to enable ( ) or disable ( ) the selected Zone.

c.Press any key to exit

31 40