Fusion MS-AV700, MS-IP700 Volume control, To enable or disable volume control, Link to zone

Page 31

Important: If a Zone is disabled, you cannot change any of the following settings for that Zone.

Volume control

Zones 3 and 4 can have volume control disabled. You should disable volume control for a Zone that has its volume controlled from another amplifier or Head unit. If volume control is:

•Enabled: turning the Encoder will change line level output for the selected Zone only.

•Disabled: turning the Encoder will not change line level output for the selected Zone.

To enable or disable volume control:

a. Select the Volume Control menu item.

b. Press the Encoder to enable ( ) or disable ( ) volume control.

c.Press any key to exit

Link to zone 1

Zones 1 and 2 can be linked so that any volume or sub-woofer level changes are applied to both Zones. A small “+” sign is displayed on screen between Zones 1 and 2 when this feature is enabled.

To link Zone 2 level to Zone 1 level:

a.Select the Link to zone 1 menu item.

b.Press the Encoder to link the two Zones ( ) or unlink ( ) the Zones.

c.Press any key to exit

Balance

To specify the balance for the selected Zone:

a. Select the Balance menu item.

b.Turn the Encoder to the left or right to adjust the Balance for the selected Zone.

c.Press any key to exit

ETHERNET SUPPORT

Add a Wi-Fi wireless router to the 700 Series entertainment system and Apple® devices like the iPad, iPhone and iPod touch® can wirelessly control the audio around the boat. Apps are available for download to enable iPad, iPhone or iPod touch wireless control.

For further connection details, see www.fusionelectronics.com

WIRED REMOTE

The 700 Series Marine Stereo can be controlled by MS-NRX200 wired remote controls installed in the various audio Zones throughout the vessel. There are different cable requirements depending on whether the 700 Series and remote controls are connected to an existing NMEA2000 bus or in a FUSION-only installation.

NMEA-2000 bus installation

FUSION’s MS-NRX200 wired remote controls can connect to the NMEA 2000 bus, removing the need to wire back to the stereo unit. The communication is both ways, as FUSION’s MS-NRX200 remote can repeat NMEA data like depth, speed and wind direction on the remote’s screen. You will require a FUSION NMEA 2000 starter kit (MS-N2KSTART — to create a NMEA Bus) if you wish to connect the remote to the the existing NMEA 2000 Bus, you will require a MS-N2KCONN.

FUSION-only installation

Smaller or older vessels without NMEA 2000 can still have FUSION MS-NRX200 wired remotes in almost any location.

No starter kit is required as the MS-NRX200 wired remote package includes everything necessary to connect it directly to the 700 Series unit.

41

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Series Manual Handling CD or DVD disc’s MS-AV700 model only Using iPodCare and Maintenance USB Flash DrivesRegister Your Product Online Contents Index Source Play/Pause Forward Power Mute Clock BrightnessUser Interface and Controls Menu Tuner Auxiliary IPodMenu key Rotary Encoder and Menu KEYMenu exit Accessing Menus Adjusting levelsGetting Started To power the unit on or offPower Opening Control ScreensAdjusting Volume Level To mute and unmute the volume Tuning rangeVHF tuning range To adjust the volume levelAuxiliary input sensitivity To set sub-woofer levels or toneFCC compliance statement General specificationsClock Problem SolutionAppendices To set the alarmTo clear the alarm Problem Solution GeneralTo enable or disable the AM of VHF tuner sources To adjust the brightness of the display screenSources VHF region To select one of the available tuner bandsTel mute Tuner regionLanguage Power saveTo tune to a required frequency, channel or preset Key soundSub filter Channel SkippingTo set or unset a channel from being skipped Channel Locking / unlocking To add a new presetTo remove one or more presets To access a locked channelTo enter Parental menu Turning scan mode onParental mode Minimizing background noiseTo listen to input from your iPod Special iconsCategory To select a CategoryTo select a channel Selecting tracks from a playlistSirius XM menu options ChannelsActivating your Sirius XM tuner To select 12 or 24 hour clock display modeControlling Playback To set the clock To change a setting in the iPod settings menuTo listen to music from your USB flash drive Connecting auxiliary deviceAdjusting Auxiliary input level Supported iPod sleevesFor example, to select a Folder then track Selecting audio tracks from USB flash driveTo connect your iPod, you will need MS-AV700 modelTo connect your USB flash drive, you will need MS-IP700 model Before inserting iPod To change a highlighted setting in the USB settings menuTo insert your iPod or USB flash drive Auxiliary Input When using your iPod with either modelTo listen to input from an alternate auxiliary device To enter the name for the selected ZoneTo specify the sub-woofer level for the selected Zone Fusion MS-NRX200 Remote ControlVolume limit Sub-woofer levelFUSION-only installation Volume controlTo enable or disable volume control NMEA-2000 bus installationMS-AV700 model only Selecting and setting up a zoneEnabled Setting UP the 700 SeriesFollowing keys work for DVD / iPod / USB sources only DVD source selectedDVD source not selected Series Connection ExampleInstalling the 700 Series InstallationDimensions side view Connect an AM/FM marine antenna Connections
Related manuals
Manual 72 pages 47.06 Kb Manual 72 pages 59.69 Kb
Top Page Image Contents