Graco 312497F important safety instructions Purging Air from Pump to Master Divider Valve Lines

Page 10

Repair

Section 3: Purging Air from Pump to Master Divider Valve Lines

LUBE POINT

SECONDARY

MASTER

BLEED THROUGH ALL PORTS

SYSTEM PUMP

TI11114

FIG. 8

Steps 1-3, refer to FIG. 8.

1.Install the line from the system pump to the master divider valve, but do not completely tighten the con- nection at the master valve’s lube inlet.

2.Cycle the system pump until air-free lubricant is observed flowing from the line at the master divider valve’s lube inlet.

3.Tighten the fitting at the lube inlet port while lubri- cant is still flowing.

The system is now ready for operation.

10

312497F

Image 10
Contents Divider Type Maximum Pressure Lube PointsPressure kPSI SectionsPressure Relief Procedure Typical Divider Valve Combinations SetupComponent Identification Divider ValvesPrefilling Lubricant Distributor Lines Filling Secondary-to-Lube Point LinesFilling Master-to-Secondary Lube Lines Filling Master Divider Valve Repair Section Air purging afterTI11098 TI11113 Purging Air from Pump to Master Divider Valve Lines Lube Point Secondary Master Disconnect Hand Pump Bleed Hose Here Lube Point Secondary Master Rupture Indicator Performance IndicatorsReset Indicator with Memory Automatic Relief Indicator4a. Master Divider Valve Equipped With Performance Indicator Torque Values *see , Assembly Torque ft-lbs MSP/MH MXP MGOContamination Blockage Separation BlockageMD Series Technical DataDimensions PartsMJ Series Lbs oz 1.55 kgParts MSP Series Crossport Plate Optional Parts MSP Series 312497F MHH Series Lube Outlet Inlet Typical Part No. Description MXP Series Ti11477 Parts MGO Series 54,%43 $#!4/2 0/243 Parts MX Series v /54,%4 Parts MX Series Accessories Rupture Indicator MH Divider Valves Only Rupture-to-Atmosphere Indicator Rupture-to-Atmosphere Indicator with Spud AssemblySingling and Crossporting Bar Assemblies Cycle IndicatorsRupture Discs 1175Cycle Counters Part No Cycle SwitchesPart Numbers Proximity Cycle Switches Description Type Part Number Pins SealProximity Switch Connection Cables Connection Cables forGraco Standard Warranty Graco Information