Yamaha M2500, Yamaha Mixing Consol owner manual Matrix/St/Mono/Lcr

Control panel

When you change the setting of the GROUP/AUX FLIP switch, numerous functions of the output chan- nels of GROUP buses 1–8 and AUX buses 7–14 will change in addition to the faders. The functions avail- able for the output channels of each bus are shown below for each setting (GROUP/AUX) of the GROUP/AUX FLIP switch.

• GROUP/AUX FLIP switch= GROUP (principal application: main console)

Output channel	GROUP buses 1–8	AUX buses 1–6	AUX buses 7–14
Master control	100 mm faders	100 mm faders	Rotary faders
Channel assign switch	❍	✕	✕
(MATRIX/ST/MONO/LCR)
PAN control	❍	✕	✕
Mute switch	ON/EDIT	ON	ON
INSERT I/O	❍	❍	✕

• GROUP/AUX FLIP switch= AUX (principal application: monitor console)

Output channel	GROUP buses 1–8	AUX buses 1–6	AUX buses 7–14
Master control	Rotary faders	100 mm faders	100 mm faders
Channel assign switch	✕	✕	❍
(MATRIX/ST/MONO/LCR)
PAN control	✕	✕	❍
Mute switch	ON	ON	ON/EDIT
INSERT I/O	✕	❍	❍

Note: The output channels of AUX buses 1–6 are not affected by the GROUP/AUX FLIP switch.

M2500—Owner’s Manual 15