Yamaha Yamaha Mixing Consol, M2500 owner manual +R switch, Phones headphone control, Phones jack

Control panel

D L+R switch

If this switch is on (), the monitor signal sent to the MONITOR OUT/PHONES jacks will be mixed to monaural.

E LEVEL control

This adjusts the final output level from the MONI- TOR OUT jacks (L, R, MONO/C). It does not affect the signal that is output from the PHONES jack. The “▲” position is nominal level.

G PHONES (headphone) control

This adjusts the level of the signal that is output from the PHONES jack. It does not affect the signal that is output from the MONITOR OUT jacks. The “▲” position is nominal level.

H PHONES jack

A set of monitoring headphones can be connected here.

F ON switch

This is an on/off switch for the signal that is output from the MONITOR OUT jacks (L, R, MONO/C). If this is on, the indicator above the switch will light. This switch does not affect the signal that is output from the PHONES jack.

	MATRIX			MONITOR
STEREO		STEREO	SUBIN	INPUT	MASTER
				ST	ST	ST
L RMONO/C	G1/A7 G2/A8 G3/A9 G4/A10 G5/A11 G6/A12 G7/A13 G8/A14	L RMONO/C		(PFL)	PFL	AFL
			L R	MONOL RON	MONOL RMONOL R		ON
INSERT I/O
0dB
ST L
	ST OUT
	+4dB
CHECK	L
ON
Control
ON/EDIT
from CPU
	AFL
INSERT I/O	MATRIX
0dB
ST R
	ST OUT
	+4dB
ON	R
INSERT I/O
0dB
MONO/C
	+4dB
	MONO/C
CHECK
ON	MATRIX
Control
ON/EDIT
from CPU								4	5	6
	AFL
										L
										MONITOR
								L+R	LEVEL	OUT
										+4dB
							MASTER			R
							PFL
										MONO/C
										ON
							INPUT	MASTER
									PHONES
							1 2		7	8

20 M2500—Owner’s Manual