Yamaha M2500, Yamaha Mixing Consol owner manual Rear panel, Insert I/O jacks, Nominal input

Rear panel

Monaural input channel input/output jacks

24	23	22	21	20	19	18	17
INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT

1

INSERT	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT
I/O 0dB	I/O 0dB	I/O 0dB	I/O 0dB	I/O 0dB	I/O 0dB	I/O 0dB	I/O 0dB

2

A INPUT jacks

These are XLR-3-31 type input jacks (balanced). If the rear panel PHANTOM MASTER switch and the +48 V switch of the corresponding monaural input channel are on, phantom power will be supplied. The nominal input levels and pin wiring are as follows.

■Nominal input

•–26 dB pad switch= on / +10 dB to –34 dB

•–26 dB pad switch= off / –16 dB to –60 dB

1(ground)

Male XLR plug

3 (cold)

2 (hot)

B INSERT I/O jacks

These are TRS phone jacks for inserting external effect units into each monaural input channel. The nominal level is 0 dB. The pin wiring is as follows.

	1/4"	phone plug	Tip (send)
Tip (send)
Ring (return)	To processor’s input
1/4" TRS phone plug			Sleeve (ground)
Sleeve (ground)	1/4"	phone plug	Tip (return)

Connect to INSERT I/O jack

From processor’s output

Sleeve (ground)

M2500—Owner’s Manual 25