Yamaha Yamaha Mixing Consol, M2500 owner manual Control change table, Control No Channel Mute group

The Scene Memory function

Control change table

The M2500 is able to receive control change messages from the MIDI IN connector to switch on/off the ON/EDIT switches of the input channels, G1/A7–G8/ A14 section, and stereo/monaural master section. When a control change number with a value in the range of “0–63” is received, the ON/EDIT switch of the corresponding channel will be turned “off,” and when a value in the range of “64–127” is received the switch will be turned “on.” Also, when you press an ON/EDIT switch on the M2500 to turn it on/off, the corresponding control change number will be trans- mitted from the MIDI OUT connector with a value of 127/0.

When mute groups (page 37) are being used, control change numbers 105–112 can be received and trans- mitted to turn mute groups on/off. The same values are used to indicate the on/off status as when turning the ON/EDIT switches on/off.

Note: If you wish to use control change messages to switch M2500 channels or mute groups on/off, make sure that the Utility mode item CC (control change transmission/reception) is turned “on” (this is the factory setting).

The following table shows the M2500 channels (and mute groups) that correspond to each control change number.

Control No.	Channel	Control No.	Channel	Control No.	Mute group
1	CH INPUT 1	36	CH INPUT 36	105	MUTE GROUP 1
2	CH INPUT 2	37	CH INPUT 37	106	MUTE GROUP 2
3	CH INPUT 3	38	CH INPUT 38	107	MUTE GROUP 3
4	CH INPUT 4	39	CH INPUT 39	108	MUTE GROUP 4
5	CH INPUT 5	40	CH INPUT 40	109	MUTE GROUP 5
6	CH INPUT 6	41	CH INPUT 41	110	MUTE GROUP 6
7	CH INPUT 7	42	CH INPUT 42	111	MUTE GROUP 7
8	CH INPUT 8	43	CH INPUT 43	112	MUTE GROUP 8
9	CH INPUT 9	44	CH INPUT 44
10	CH INPUT 10	45	CH INPUT 45
11	CH INPUT 11	46	CH INPUT 46
12	CH INPUT 12	47	CH INPUT 47
13	CH INPUT 13	48	CH INPUT 48
14	CH INPUT 14	49	ST CH INPUT 1
15	CH INPUT 15	50	ST CH INPUT 2
16	CH INPUT 16	51	ST CH INPUT 3
17	CH INPUT 17	52	ST CH INPUT 4
18	CH INPUT 18	53	CH INPUT 49
19	CH INPUT 19	54	CH INPUT 50
20	CH INPUT 20	55	CH INPUT 51
21	CH INPUT 21	56	CH INPUT 52
22	CH INPUT 22	57	CH INPUT 53
23	CH INPUT 23	58	CH INPUT 54
24	CH INPUT 24	59	CH INPUT 55
25	CH INPUT 25	60	CH INPUT 56
26	CH INPUT 26	61	G1/A7 OUT
27	CH INPUT 27	62	G2/A8 OUT
28	CH INPUT 28	63	G3/A9 OUT
29	CH INPUT 29	64	G4/A10 OUT
30	CH INPUT 30	65	G5/A11 OUT
31	CH INPUT 31	66	G6/A12 OUT
32	CH INPUT 32	67	G7/A13 OUT
33	CH INPUT 33	68	G8/A14 OUT
34	CH INPUT 34	69	STEREO OUT
35	CH INPUT 35	70	MONO/C OUT

36 M2500—Owner’s Manual