EDITING THE KEYBOARD
When editing the keyboard, please note that the changes will affect all the keys on the MPK25. The keyboard properties you can edit include MIDI Channel, Octave, Aftertouch, and Velocity.
MIDI CHANNEL – This is the MIDI Channel on which the keyboard will be transmitting information.
OCTAVE – This is the default octave shift that will be applied to the keyboard when the current Preset is loaded.
AFTERTOUCH – Aftertouch describes pressure applied to the keys after they have been pressed. Aftertouch can often be used to control the vibrato, sustain or decay of a sound. The Aftertouch setting on the MPK25 can be set to either “On” or “Off”. When set to “Off”, the MPK25 will ignore Aftertouch.
VELOCITY – Velocity describes how hard the keys are struck. Most often, velocity is directly mapped to the perceived loudness of a sound; so the harder you play the keys, the louder the sound will be. The Velocity setting on the MPK25 can be set to either “On” or “Off”. When set to “On”, the keyboard will detect how hard the keys are pressed and translate these values into corresponding MIDI velocities. When set to “Off”, MPK25 will output a constant MIDI velocity, no matter how hard the keys are pressed.
SELECT PROPERTY
1.To edit the keyboard, press the [EDIT] button to enter Edit Mode.
2.Now select the keyboard for editing by pressing one of the keys.
3.You will see Page 1 displayed on the screen (shown on the left).
4.Turn the [VALUE] dial to select the property you wish to edit (Octave, Aftertouch, Velocity).
5.Press [ENTER] to edit the selected property.
PRESS ENTER TO EDIT
KEYBOARD OCTAVE
MIDI CHANNEL FIELD
1.In the first field of this page, you can set the keyboard’s MIDI channel field by turning the [VALUE] dial.
2.Press [>] to edit the Octave shift.
3.The Octave shift field will begin to blink. Set the shift by turning the [VALUE] dial (default shift is set to “0”).
4.When finished, press [ENTER] to return to Page 1.
OCTAVE SHIFT FIELD
KEYBOARD AFTERTOUCH
MIDI CHANNEL FIELD
1.You can set the keyboard’s MIDI channel field by turning the [VALUE] dial.
2.When done, press [>] to edit Aftertouch.
3.The Aftertouch field will begin to blink. Turn the [VALUE] dial to turn Aftertouch “On” or “Off” (default is set to “On”).
4.When finished, press [ENTER] to return to Page 1.
AFTERTOUCH FIELD
KEYBOARD VELOCITY
MIDI CHANNEL FIELD
1.You can set the keyboard’s MIDI channel field by turning the [VALUE] dial.
2.When done, press [>] to edit Velocity.
3.The Velocity field will begin to blink. Turn the [VALUE] dial to turn Velocity “On” or “Off” (default is set to “On”).
4.When finished, press [ENTER] to return to Page 1.
VELOCITY FIELD
12