EDITING KNOBS
The knobs on the MPK25 are controllers which can be set to transmit Control Change or Aftertouch information. In addition, the knobs may also be assigned as an Increment/Decrement function. Their default operation is to transmit Control Change information when used.
What is Control Change?
Control Change refers to the use of MIDI Continuous Controller data. Continuous Controller
(CC)data are MIDI messages capable of transmitting a range of values
What is Aftertouch?
Aftertouch refers to MIDI information sent when pressure is applied to a pad after it has been struck, and while it is being held down. Aftertouch is often used to control volume, vibrato and other parameters. On the MPK25, the knobs can also be assigned to transmit Aftertouch information.
SELECT EVENT TYPE IN THIS FIELD.
1.Press [EDIT] button to enter EDIT MODE.
2.Turn the knob which you would like to edit.
3.On Page 1, turn the [VALUE] dial to select ‘CTRL CHANGE’ (Control Change) or ‘AFTERTOUCH’ as the event type.
4.Press [ENTER] to view Page 2.
Depending on which event type you select on Page 1, parameter options on Page 2 will be changed.
5.Use [<] and [>] buttons to move through fields on the second page.
The parameter fields available for each event type are outlined in the following pages.
16