Akai MPK25 manual Editing Note Repeat, Please note

Page 29

EDITING NOTE REPEAT

The MPK25 features the Note Repeat function, which can be found on our legendary Music Production Center (MPC) models. With Note Repeat enabled, you can repeatedly trigger a sound by simply holding down a pad. The sound will be retriggered at a rate equivalent to the Time Division currently selected on the MPK25. With the Note Repeat feature, you can record a phrase that would be difficult to record in real time, such as 16 beat hi hat, snare roll, etc…

The following Note Repeat settings may be edited:

BUTTON MODE (TOGGL/MOTRY) – This describes whether the [NOTE REPEAT] button functions in a momentary or toggle fashion.

GATE – The gate parameter describes the duration of the repeated notes.

SWING – The swing parameter describes the swing offset for the even notes in the repeated sequence.

SELECT PROPERTY

1.To edit Note Repeat, press the [EDIT] button to enter Edit Mode.

2.Now select Note Repeat for editing by pressing [NOTE REPEAT].

3.You will see Page 1 displayed on the screen (shown on the left).

4.Turn the [VALUE] dial to select the property you wish to edit - (Button Mode) or (Gate, Swing).

5.Press [ENTER] to edit the selected property.

PRESS ENTER TO EDIT

Please refer to the following illustrations to help you understand how Note Repeat parameters affect the triggered sequence:

Let’s take the kick drum sequence shown on the left as an example. This sequence was generated with the Note Repeat feature with a Time Division setting of 1/4 note.

Now, if we decrease the Gate parameter, the sequence will look like this.

Conversely, if we increase the Gate parameter, the sequence will look like this.

Now, if we were to add some swing to our original sequence, we will end up with a sequence like this. Notice how each even note in the sequence is being pushed back in time to create the swing effect. If we keep increasing the Swing value, these notes will occur closer and closer to the odd notes.

Please note:

For the Gate effect to be perceived, the sounds you are triggering need to have a long decay.

25

Image 29
Contents Operators Manual Page Table of Contents Page Front Panel Overview Page Rear Panel Overview Hookup Diagram USB cable not connected USB cable connectedOctave and Transposition Displaying InformationControl Aftertouch About Modes Preset ModeWhat is a Preset? Preset ModeEdit Mode Controller Selected Edit Mode ParametersKeyboard Octave Editing the KeyboardKeyboard Aftertouch Keyboard VelocityUse and buttons to move through fields on the second What is a Note Message? What is a Program Change?Editing the Pads Pressure Behavior Play Mode FieldMidi Channel Field Program Change Field Program Change ParametersBank M Field Bank L FieldEditing Knobs What is Control Change?What is Aftertouch? Control Change Field Control Change ParametersMinimum Range Field Maximum Range FieldAftertouch Parameters INCREMENT/DECREMENT Parameters Editing Buttons Play ModeProgram Change Parameters Editing the Arpeggiator Button Mode Arpeggio Parameters TYPE, RANGE, Button ModeARP Type RangeSwing Arpeggio Parameters GATE, SwingGate Please note Editing Note RepeatGate Field Editing Time Division Default Time DivisionEditing the Pitch Bend Wheel Midi Channel Editing the Modulation WheelMidi CC Minimum ValueEditing TAP Tempo Editing Transport ControlEditing Sustain Pedal Input Other Functions Editing Expression Pedal InputDrum PAD Parameters Kill Midi Page1 Global ModeLCD Contrast PAD Threshold SysEx Transfers to the MPK25 Save GlobalProg Change Program Change Program Change ModeFrequently Asked Questions Troubleshooting Email support@akaipro.com TEL 401.658.4032 U.S Technical Specifications51-0277-A
Related manuals
Manual 76 pages 6.09 Kb