EDITING THE PITCH BEND WHEEL
The Pitch Bend wheel can be assigned to transmit pitch bend information on a specific MIDI Channel.
1.Press the [EDIT] button to enter Edit Mode.
2.Now select the Pitch Bend wheel for editing by moving the wheel.
3.You will see Page 1 displayed on the screen (shown on the left).
4.Press [ENTER] to edit the Pitch Bend settings.
PRESS ENTER TO EDIT
5.Use the [VALUE] dial to select the MIDI Channel for the Pitch Bend wheel.
6.Press [ENTER] to accept the change.
MIDI CHANNEL FIELD
28