EDITING THE MODULATION WHEEL
The Modulation wheel can be edited to transmit a range of values on a specific MIDI Channel and MIDI CC.
1.To edit the Modulation wheel settings, press the [EDIT] button to enter Edit Mode.
2.Now select the Modulation wheel for editing by moving the wheel.
3.You will see Page 1 displayed on the screen (shown on the left).
4.Press [ENTER] to edit the Pitch bend settings.
PRESS ENTER TO EDIT
MIDI CHANNEL
In this field, you can specify which MIDI channel the Modulation wheel will be using to transmit information.
1.Use the [<] button to select MIDI Channel field.
2.Turn [VALUE] dial to select the desired MIDI Channel.
3.Use the [>] button to go to next field.
MIDI CHANNEL FIELD
MIDI CC
In this field, you can specify which MIDI CC the Modulation wheel will be transmitting.
1.Use the [>] button to select MIDI CC field.
2.Turn [VALUE] dial to select the desired MIDI CC.
3.Use the [>] button to go to next field.
MIDI CC FIELD
MINIMUM VALUE
In this field, you can specify the minimum value that the Modulation wheel can transmit.
1.Use the [>] button to select minimum value field.
2.Turn [VALUE] dial to select the desired minimum value.
3.Use the [>] button to go to next field.
MINIMUM VALUE
MAXIMUM VALUE
In this field, you can specify the maximum value that the Modulation wheel can transmit.
1.Use the [>] button to select maximum value field.
2.Turn [VALUE] dial to select the desired maximum value.
Note: Setting the maximum value lower than the minimum will cause the
Modulation wheel to work in reverse.
MAXIMUM VALUE
29