Akai MPK25 manual PAD Threshold

Page 39

PAD THRESHOLD – Page 6

PAD THRESHOLD is the minimum force required to activate the pads. If you experience “ghost” triggering due to stage vibrations, you may wish to set this threshold higher. On the other hand, if you find it difficult to cause the pads to output sounds when playing them lightly, you may wish to set this value to a lower number.

1.While in Global Mode, use [>] button to scroll to PdThresh (page 6).

2.Turn [VALUE] dial to select Transposition in semi-tones.

PAD THRESHOLD FIELD

3.Press [ENTER] to set Transposition.

Note: Transposing the keyboard will have a global effect on the

MPK25.

KEYBOARD TRANSPOSITION – Page 7

KEYBOARD TRANSPOSITION FIELD

KEYBOARD TRANSPOSITION allows you to transpose MPK25’s keyboard up or down.

1.While in Global Mode, use [>] button to scroll to Transpos (page 7).

2.Turn [VALUE] dial to select Transposition in semi-tones.

3.Press [ENTER] to set Transposition.

Note: Transposing the keyboard will have a global effect on the MPK25.

MIDI CLOCK – Page 8

MIDI CLOCK FIELD

MIDI CLOCK is used to synchronize devices together. In addition, MIDI Clock on the MPK25 is used in conjunction with the Note Repeat and Arpeggiator features to determine the location of the MIDI notes output when using either of these features. The MPK25 can be a master or slave for MIDI Clock transmission and reception. MIDI Clock

1.While in Global Mode, use [>] button to scroll to MIDI CLK (page 8).

2.Turn [VALUE] dial to select “Internal” if you would like to generate MIDI Clock internally or “External” if you would like to slave the MPK25 to an external MIDI Clock source.

3.Press [ENTER] to set MIDI Clock source.

Note: If “External” has been selected as a MIDI Clock source, the [TAP TEMPO] button will be disabled.

TAP TEMPO AVERAGE – Page 9

TAP AVERAGE FIELD

When using [TAP TEMPO] button to set the tempo, the MPK25 averages a number of taps in order to determine the tempo. You can set the number of taps used to determine the TAP TEMPO AVERAGE in this field.

1.While in Global Mode, use [>] button to scroll to Tap AVG (page 9).

2.Turn [VALUE] dial to select number of taps.

3.Press [ENTER] to set tap average.

35

Image 39
Contents Operators Manual Page Table of Contents Page Front Panel Overview Page Rear Panel Overview Hookup Diagram USB cable not connected USB cable connectedOctave and Transposition Displaying InformationControl Aftertouch About Modes Preset ModeWhat is a Preset? Preset ModeEdit Mode Controller Selected Edit Mode ParametersKeyboard Velocity Editing the KeyboardKeyboard Octave Keyboard AftertouchWhat is a Note Message? What is a Program Change? Editing the PadsUse and buttons to move through fields on the second Play Mode Field Midi Channel FieldPressure Behavior Bank L Field Program Change ParametersProgram Change Field Bank M FieldWhat is Control Change? What is Aftertouch?Editing Knobs Maximum Range Field Control Change ParametersControl Change Field Minimum Range FieldAftertouch Parameters INCREMENT/DECREMENT Parameters Editing Buttons Play ModeProgram Change Parameters Editing the Arpeggiator Range Arpeggio Parameters TYPE, RANGE, Button ModeButton Mode ARP TypeArpeggio Parameters GATE, Swing GateSwing Please note Editing Note RepeatGate Field Editing Time Division Default Time DivisionEditing the Pitch Bend Wheel Minimum Value Editing the Modulation WheelMidi Channel Midi CCEditing TAP Tempo Editing Transport ControlEditing Sustain Pedal Input Editing Expression Pedal Input Drum PAD ParametersOther Functions Kill Midi Page1 Global ModeLCD Contrast PAD Threshold SysEx Transfers to the MPK25 Save GlobalProg Change Program Change Program Change ModeFrequently Asked Questions Troubleshooting Email support@akaipro.com TEL 401.658.4032 U.S Technical Specifications51-0277-A
Related manuals
Manual 76 pages 6.09 Kb