Tascam FW-1082 owner manual Mackie Emulation Protocol, HUI Emulation Protocol

Page 19

 

 

4 – Control Surface Modes and Operation

 

 

To set the FW-1082 to Native protocol:

3 In the drop-down Control Protocol menu,

1

Open the FW-1082Control Panel

select FW-1082 NATIVE.

 

2

Select the Settings tab

 

Figure 4.2: Selecting Native Mode protocol

For more detailed information on specific implemen- tation within the host application, please refer to the Application Notes for your software of choice.

Mackie Emulation Protocol

The FW-1082 can be used to emulate the control messages sent by the Mackie Control™.

When in Mackie Control Emulation mode, the audio and MIDI functionality of the FW-1082 are unchanged, but the MIDI messages transmitted and recognized by most of the control surface are changed to closely pattern those of the Mackie Con- trol.

This enables you to use the FW-1082 with software applications which may not yet directly support the FW-1082’s Native Mode, but do support the Mackie Control.

To set up FW-1082 to the Mackie Emulation protocol:

1Open the FW-1082Control Panel

2Select the Settings tab

3In the drop-downControl Protocol list, select Mackie Control Emulation.

Figure 4.3: Selecting Mackie Control emulation

protocol

For detailed information on how the FW-1082’s con- trol surface maps to controls within specific applica- tions, please refer to the Application Notes for the corresponding application .

HUI Emulation Protocol

The FW-1082 can be used to emulate the control messages sent by the Mackie HUI™ (Human User Interface).

When in HUI emulation mode, the audio and MIDI functionality of the FW-1082 are unchanged, but the MIDI messages transmitted and recognized by most of the control surface are changed to closely pattern

those of the Mackie HUI. This enables you to use the FW-1082 with software applications which may not yet directly support the FW-1082’s Native mode, but do support the HUI.

To set up the FW-1082 in HUI emulation protocol:

1Open the FW-1082Control Panel

TASCAM FW-1082 Owner’s Manual 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DAW Control Surface / FireWire Audio-MIDI Interface For Canada Important Safety PrecautionsImportant Safety Instructions Contents Specifications Troubleshooting and SupportControl Panel Table of Figures 1IEEE.1394 4-pin and 6-pin connectorsIntroduction FeaturesOverview Box System RequirementsNomenclature used in the manual Special notes for touch-sensitive faders Software application notesCopyright, etc Front Panel Parts of the FW-1082Channel controls Mode controls Monitoring and indicatorsEncoders and controls Rear panel Monitoring Phones Line inputs and inserts Power jackDAW transport controls Monitoring and phones Mic inputs and phantom power switchFoot switch jack Foot SW Coaxial Digital audio I/O in and OUTFW-1082 outputs produce a thump when the power is turned on Power jack and switchDedicated Computer Controls Functional OverviewControl Surface Modes Global ControlsDedicated Modifier Keys Setting and checking clock ratesControl Surface Modes and Operation Computer Control Mode General NotesNative Protocol HUI Emulation Protocol Mackie Emulation ProtocolCursor keys Midi Control Mode General NotesProgramming the Midi Control Messages Setting the Midi message typeProgramming Keys Controller On/Off Programming EncodersProgramming Faders Monitor Mix Mode General NotesBanking Audio I/O and the Monitor Mixer Monitoring SetupsMaking mixer settings Setting the master fader to 0dB unity gainSetting Input levels Control Panel Settings tabMaster Fader Affects Anlg LR Gain Quick Start tab Windows only Midi Programming tabCore Audio tab for OS CoreAudio tab OS X onlyAudio troubleshooting Troubleshooting and SupportControl surface troubleshooting Contacting Us Analog I/O SpecificationsDigital I/O Overall System SpecificationsMisc. I/O Analog performance Physical, etc. specificationsDimensions of the FW-1082 Dimensional drawingPage FW-1082
Top Page Image Contents