Tascam FW-1082 owner manual Important Safety Instructions

Page 3

Important Safety Instructions

1Read these instructions.

2Keep these instructions.

3Head all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radia- tors, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. Grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are pro- vided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched, particularly at plugs, convenience recep- tacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all serving to qualified service personnel. Ser- vicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

•Do not expose this apparatus to drips or splashes.

•Do not place any objects filled with liquids, such as vases, on the apparatus.

•Do not install this apparatus in a confined space such as a book case or similar unit.

•The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position.

TASCAM FW-1082 Owner’s Manual 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents DAW Control Surface / FireWire Audio-MIDI Interface For Canada Important Safety PrecautionsImportant Safety Instructions Contents Troubleshooting and Support SpecificationsControl Panel Table of Figures 1IEEE.1394 4-pin and 6-pin connectorsFeatures IntroductionOverview System Requirements BoxNomenclature used in the manual Software application notes Special notes for touch-sensitive fadersCopyright, etc Front Panel Parts of the FW-1082Channel controls Monitoring and indicators Mode controlsEncoders and controls Monitoring Phones Line inputs and inserts Power jack Rear panelDAW transport controls Monitoring and phones Mic inputs and phantom power switchFoot switch jack Foot SW Coaxial Digital audio I/O in and OUTFW-1082 outputs produce a thump when the power is turned on Power jack and switchDedicated Computer Controls Functional OverviewControl Surface Modes Global ControlsDedicated Modifier Keys Setting and checking clock ratesComputer Control Mode General Notes Control Surface Modes and OperationNative Protocol HUI Emulation Protocol Mackie Emulation ProtocolCursor keys Midi Control Mode General NotesSetting the Midi message type Programming the Midi Control MessagesProgramming Keys Controller On/Off Programming EncodersMonitor Mix Mode General Notes Programming FadersBanking Audio I/O and the Monitor Mixer Monitoring SetupsMaking mixer settings Setting the master fader to 0dB unity gainSetting Input levels Settings tab Control PanelMaster Fader Affects Anlg LR Gain Quick Start tab Windows only Midi Programming tabCore Audio tab for OS CoreAudio tab OS X onlyTroubleshooting and Support Audio troubleshootingControl surface troubleshooting Contacting Us Analog I/O SpecificationsOverall System Specifications Digital I/OMisc. I/O Analog performance Physical, etc. specificationsDimensions of the FW-1082 Dimensional drawingPage FW-1082
Top Page Image Contents