Tascam FW-1082 owner manual Digital I/O, Misc. I/O, Overall System Specifications

7 – Specifications

Digital I/O

Digital input (COAXIAL)

2-channel serial digital audio signal input terminal. In the case of Hi sampling, Hi-speed mode is supported.

Connector	RCA jack x 1
Input impedance	75Ω
Format	IEC60958
Audio bit length	24-bit

Digital output (Coaxial)

2ch serial digital audio signal output terminal. In the case of Hi sampling, Hi-speed mode is supported.

Connector	RCA jack x 1
Output impedance	75Ω
Format	IEC60958
Audio bit length	24-bit

Misc. I/O

MIDI input 1-2
MIDI input terminal
Connector	5-pin DIN connector – conforms to MIDI specifications x 2
FireWire‘ (IEEE.1394 digital interface)
Connector	IEEE.1394 connector x 2
Format	IEEE.1394
Transmit rate	400Mbps
FOOT SW (foot switch)
Punch In/Out of DAW application
Connector:	Normally-open 1/4" TRS jack

Overall System Specifications

Sampling frequency
Internal clock	44.1kHz / 48.0kHz / 88.2kHz / 96.0kHz
External clock	Digital input

32 TASCAM FW-1082 Owner’s Manual