Sony RS-232C manual Muting 43H 4DH 55H 54H ‘CMUT’, Parallel Output OFF 43H 50H 4FH 46H ‘CPOF’

MUTING: 43[H] 4D[H] 55[H] 54[H] (‘CMUT’)

This command is used to mute the specified channel or cancel muting of the specified channel.

•Packet format

43[H] 4D[H] 55[H] 54[H] “parameter” 0D[H]

•Parameter

The parameter consists of the two-byte data in the following order.

byte	Parameter name
1st	CHANNEL
2nd	MUTING

•Channel

Same as that of LEVEL DOWN command.

• Muting

MUTING
CANCEL MUNTING	40[H] ( ‘@’ )
MUTING	41[H] ( ‘A’ )

Example: When muting REMOTE1

43[H] 4D[H] 55[H] 54[H]42[H] 41[H] 0D[H] (‘C M U T B A CR’)

PARALLEL OUTPUT OFF: 43[H] 50[H] 4F[H] 46[H] (‘CPOF’)

This command is used to turn off OUTPUT of the REMOTE PARALLEL terminals separately of the SRP-X700P.

•Packet format

43[H] 50[H] 4F[H] 46[H] “parameter” 0D[H]

•Parameter

Specify any single channel that you want to turn off, as the parameter.

CHANNEL
1	31[H] ( ‘1’ )
2	32[H] ( ‘2’ )
3	33[H] ( ‘3’ )
4	34[H] ( ‘4’ )
5	35[H] ( ‘5’ )
6	36[H] ( ‘6’ )
7	37[H] ( ‘7’ )
8	38[H] ( ‘8’ )
9	39[H] ( ‘9’ )
10	3A[H] ( ‘:’ )

Example: When turning off channel 2

43[H] 50[H] 4F[H] 46[H] 32[H] 0D[H] (‘C P O F 2 CR’)

– 10 –