Sony RS-232C manual Parallel Output on 43H 50H 4FH 4EH ‘CPON’

PARALLEL OUTPUT ON: 43[H] 50[H] 4F[H] 4E[H] (‘CPON’)

This command is used to turn on OUTPUT of the REMOTE PARALLEL terminals separately of the SRP-X700P.

•Packet format

43[H] 50[H] 4F[H] 4E[H] “parameter” 0D[H]

•Parameter

Same as that of the PARALLEL OUT OFF command.

Example: When turning on channel 1

43[H] 50[H] 4F[H] 4E[H] 31[H] 0D[H] (‘C P O N 1 CR’)

PROJECTOR POWER CONTROL: 43[H] 50[H] 4A[H] 50[H] (‘CPJP’)

This command is used to turn on the power or to set the power standby of the projected that is connected to the PROJECTOR CONTROL terminal of the SRP-X700P.

•Packet format

43[H] 50[H] 4A[H] 50[H] “parameter” 0D[H]

•Parameter

Specify either POWER ON or POWER STANDBY as the parameter.

POWER
STANDBY	40[H] ( ‘@’ )
ON	41[H] ( ‘A’ )

Example: When turning on the power of projector

43[H] 50[H] 4A[H] 50[H]41[H] 0D[H] (‘C P J P A CR’)

– 11 –