Sony RS-232C manual Line 4 Input 43H 49H 4DH 34H ‘CIL4’

Page 36

LINE 4 INPUT : 43[H] 49[H] 4D[H] 34[H] (‘CIL4’)

This command is used to implement setting up the LINE 4 input channel.

Various setups can be memorized in the scene memories by specifying these scene Nos.

•Packet format

43[H] 49[H] 4D[H] 34[H] “parameter” 0D[H]

•Parameter

The parameter consists of the 64 bytes all the time in the order as shown in the table below.

byte

Parameter name

byte

Parameter name

 

 

 

 

1st

SCENE No.

54th

LINE4 E TRIM

2nd-9th

LINE4 A INDEX

55th

LINE4 F TRIM

 

 

 

 

10th-17th

LINE4 B INDEX

56th

FUNCTION ON/OFF

 

 

 

 

18th-25th

LINE4 C INDEX

57th

PEQ1 Frequency

26th-33rd

LINE4 D INDEX

58th

PEQ1 Q

 

 

 

 

34th-41st

LINE4 E INDEX

59th

PEQ1 GAIN

 

 

 

 

42nd-49th

LINE4 F INDEX

60st

PEQ2 Frequency

50th

LINE4 A TRIM

61st

PEQ2 Q

 

 

 

 

51st

LINE4 B TRIM

62nd

PEQ2 GAIN

 

 

 

 

52nd

LINE4 C TRIM

63rd

GAIN LIMIT LEVEL

 

 

 

 

53rd

LINE4 D TRIM

64th

FADER LEVEL

 

 

 

 

When you specify NONE (30[H] ‘0’) as the scene No. in the 1st byte, you can establish the present setup.

At the same time, when you specify the scene No.(31[H] (‘1’) through 44[H] (‘D’)), parameters of the subsequent 2nd through 64th bytes are written in the scene memory.

The method of setting the scene No. and index of LINE4A through F, is the same as that of the GROUP FADER command. See pages 29 and 30.

Method of setting the LINE4A-F TRIM, FUNCTION ON/OFF, PEQ1,2 frequency, PEQ1,2 Q, PEQ1,2 Gain, Gain Limit level and input fader level is the same as that of the LINE 3 INPUT command. See pages 32 to 35.

For the packet example, see the example of the LINE 3 INPUT command on page 35. However, the parameter length becomes 64 bytes.

LINE 4 INPUT PARAMETER REQUEST : 52[H] 49[H] 4D[H] 34[H] (‘RIL4’)

This command is used to read setup of the LINE 4 input channel from the SRP-X700P.

•Packet format

52[H] 49[H] 4D[H] 34[H] “parameter” 0D[H]

•Parameter

Specify the scene No. of the scene memory that you want to read, as the parameter.

Method of specifying the scene No. is the same as that of the GROUP FADER command. See page 29.

•Return packet format

When communication with the SRP-X700P is established with success, the parameter is returned together with ACK (41[H] (‘A’)) in the order shown below.

41[H] “parameter” 0D[H]

The parameter is the same as the 63 bytes of the LINE4 INPUT command parameter from which the scene No. is exempted.

– 36 –

Page 35 Page 37
Image 36
Page 35 Page 37
Contents SRP-X700P Table of Contents Page RXD TXD DTR GND CTS OpenACK 41H ‘A’ NAK 4EH ‘N’Delimiter 0DH ‘CR’ Control S 43H 52H 43H 53H ‘CRCS’ Packet formatChannel Remote command Fader Level 43H 4CH 56H 4CH ClvlChannel 1st byte Level Down 43H 4CH 56H 2DH ‘CLV-’ Fader level 2nd byteLevel UP 43H 4CH 56H 2BH ‘CLV+’ Level UP/DOWN Stop 43H 4CH 56H 53H ‘CLVS’Line 4 Select 43H 53H 45H 4CH ‘CSEL’ Channel OFFMuting Cancel Munting Muting 43H 4DH 55H 54H ‘CMUT’Parallel Output OFF 43H 50H 4FH 46H ‘CPOF’ MutingProjector Power Control 43H 50H 4AH 50H ‘CPJP’ Parallel Output on 43H 50H 4FH 4EH ‘CPON’Scene Recall 43H 52H 43H 4CH ‘CRCL’ Status Request 52H 53H 54H 54H ‘RSTT’Scene No Return packet formatFR Setup Status MIC 1/WL 1 Level Meter ValueMIC 2/WL 2 Level Meter Value MIC 3 Level Meter ValueMIC Switch WL RFMIC Over Gain Line Input Over GainMIC Input -∞ Line OUTPUT1-6 Over GainLine OUTPUT7,8 Over Gain Line OUTPUT1-6 -∞CLIP/PROTECTION GateParallel INPUT1-6 Parallel INPUT7-12Parallel OUTPUT7-10 Fader ValueOUT10 OUT9 OUT8 OUT7 Fader ValueMIC Muting Line Input MutingLine OUTPUT1-6 Muting Line OUTPUT7,8/REC OUT1,2/SPEAKER Output 1,2 MutingGroup Muting LINE4 SelectScene Recall REMOTE6 REMOTE5 REMOTE4 REMOTE3 REMOTE2 REMOTE1FR Setup Status LOCK/FADERPanel Lock Auto MIX 43H 41H 4DH 58H ‘CAMX’ Auto MIX Parameter Request 52H 41H 4DH 58H ‘RAMX’Auto MIX Edit Parameter 43H 41H 4DH 50H Camp Input Compressor Threshold 1st byte Input Compressor Ratio 2nd byteRatio Input Compressor Attack Time 3rd byte Input Compressor Release Time 4th byteInput Gate Threshold 5th byte Input Gate Hold Time 6th byte Input Gate Release Time 7th byteOutput Limiter Threshold 8th byte Output Limiter Attack Time 9th byteLine Output 1-6 ON/OFF 13th byte Line Output 7,8, Recout 1,2 ON/OFF 14th byteREC2 REC1 OUT8 OUT7 Factory Preset 43H 52H 53H 54H ‘CRST’ Auto MIX Edit Parameter Request 52H 41H 4DH 50H RampFR Setup 43H 46H 52H 53H ‘CFRS’ Firmware Version Request 52H 56H 45H 52H ‘RVER’Firmware Version 1-7th byte Scene No st byte Index 2-9th byte MIC Input fader 10th byteLine Input fader 11th byte Line OUTPUT1-6 fader 12th bytePower On Setting 1st byte DefaultInformation 43H 49H 4EH 46H ‘CINF’ InformationInformation Parameter Request 52H 49H 4EH 46H ‘RINF’ Line 3 Input 43H 49H 4DH 33H ‘CIL3’Information 2-129th byte Trim 10th byte PEQ frequency 12 and 15th byteREF Level PEQPEQ Q 13 and 16th byte PEQ gain 14 and 17th byteGain Limit level 18th byte GainLine 3 Input Parameter Request 52H 49H 4DH 33H ‘RIL3’ Fader level 19th byteLine 4 Input 43H 49H 4DH 34H ‘CIL4’ Line 4 Input Parameter Request 52H 49H 4DH 34H ‘RIL4’Line OUTPUT1,2 43H 4FH 4CH 31H,32H ‘COL1,2’ Delay 45th byte HCF PEQ DelayREF Level 10th byte Line Output 1,2 Parameter Request 52H 4FH 4DH 31H,32H ‘ROL1,2’Line OUTPUT3-8 43H 4FH 4CH 33H-38H ‘COL3-8’ 12th PEQ1 Frequency 13th Line OUTPUT3-8 Parameter Request 52H 4FH 4DH 33H-38H ‘ROL3-8’MIC Input 43H 49H 4DH 31H-36H ‘CIM1-6’ FR1 Gain FUNCTIONON/OFFFR2 Gain FR3 GainCompressor 39th byte Compressor OFFSoft MIDMIC Input Parameter Request 52H 49H 4DH 31H-36H ‘RIM1-6’ MUTING/LINE4 Select 43H 4DH 54H 53H ‘CMTS’MIC Muting LINE3,4 MutingMIC Muting 2nd byte Line Muting 3rd byteLine OUTPUT1-6 Muting 4th byte Speaker REC OUTPUT8 OUTPUT7 OUTPUT2 OUTPUT1 OUT2 OUT1MUTING/LINE4 Select Parameter Request 52H 4DH 54H 53H ‘RMTS’Master Muting 6th byte Group Fader Muting 7th bytePanel Lock 43H 4CH 43H 4BH ‘CLCK’ Parallel I/O 43H 50H 49H 4FH ‘CPIO’FUNCTION1 None AV SELRecall LVL+Over FUNCTION2 None RecallSEL Parallel I/O Parameter Request 52H 50H 49H 4FH Rpio REC OUT 43H 4FH 52H 31H,32H ‘COR1,2’REC OUT REC OUT Parameter Request 52H 4FH 4DH 33H,32H ‘ROR1,2’ Remote 43H 53H 49H 4FH ‘CSIO’LINE3-4F machine type 1, 3, 5, 7, 9, 11 and 13th byte LINE3-4F connection 2, 4, 6, 8, 10, 12 and 14th byteControl S I/F Type 15th byte PJ Control 16th byteVideo signal type 17th through 22nd byte Remote Parameter Request 52H 50H 49H 4FH ‘RPIO’Projector protocol 23rd byte LINE4 A-C,F R Level MIC1/WL1 LevelLINE4 D-E L Level MIC2/WL2 LevelLevel 2-17th byte MIC1/WL1-MIC6/LINE2 ON/OFF 18th byteLINE3-LINE4 A-C ON/OFF 19th byte LINE4 D,E ON/OFF 20th byteScene Index Request 52H 53H 43H 49H ‘RSCI’ Scene Parameter Request 52H 53H 43H 52H ‘RSTR’ Scene Recall Button 43H 52H 53H 41H ‘CRSA’ Scene Recall Button Parameter Request 52H 52H 53H 41H ‘RRSA’Scene Store 43H 53H 54H 52H ‘CSTR’ FUNCTION1Function 1, 2 10, 11th byte Routing Input Selector Fader Muting FunctionFader Group Output Muting Function Speaker Output 43H 4FH 53H 50H ‘COSP’ Function ON/OFF 2nd byteCH1, 2 selector 11, 21st byte Speaker Output Parameter Request 52H 4FH 53H 50H ‘ROSP’ ATT 12, 22nd byteATT Level
Related manuals
Manual 35 pages 50.56 Kb Manual 19 pages 16.39 Kb

RS-232C specifications

The Sony RS-232C is a renowned communication standard that has been widely utilized in various electronic devices, enabling serial communication between computers and peripheral devices. This protocol is integral in various applications, including industrial automation, medical equipment, and consumer electronics.

One of the main features of the Sony RS-232C is its simplicity and ease of use. The standard utilizes a basic serial communication method, allowing for asynchronous data transmission. This means that data can be sent one bit at a time over a single channel, ensuring reliable communication over short distances, typically up to 50 feet, although longer distances can be achieved with proper cable management and signal boosters.

The technology behind the RS-232C standard employs voltage levels to represent binary data. Logic level zero is represented by a voltage between -3 to -25 volts, while logic level one is between +3 to +25 volts. This voltage differential is crucial for distinguishing between 'on' and 'off' states in electronic signaling. The standard supports data rates of up to 115.2 kbps, making it suitable for various applications, although it is generally limited in speed when compared to modern communication standards like USB or Ethernet.

In terms of characteristics, the Sony RS-232C supports both full-duplex and half-duplex communication, allowing for simultaneous transmission and reception of data, or one-directional data transfer, respectively. The protocol also includes control signals for flow control, such as RTS (Request to Send) and CTS (Clear to Send), which help manage data transmission and prevent data loss due to buffer overflow.

The RS-232C standard has 25-pin and 9-pin connector configurations, although many devices now utilize the more compact 9-pin DIN format. This legacy standard remains prevalent in industrial settings, as many devices still use RS-232 connections.

Despite the emergence of more advanced communication protocols, the reliability and robustness of the Sony RS-232C ensure that it remains an enduring choice for numerous applications. Its straightforward configuration, coupled with extensive documentation and support, makes it a favorable option for both new installations and the maintenance of legacy systems in various industries. As technology continues to evolve, the RS-232C standard remains a testament to the enduring principles of reliable communication.
Top Page Image Contents