Sony RS-232C manual Line Output 1-6 ON/OFF 13th byte, Line Output 7,8, Recout 1,2 ON/OFF 14th byte

Page 26

•LINE OUTPUT 1-6 ON/OFF (13th byte)

This command is used to turn ON/OFF the automatic mixer according to the output channels.

When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-6 and bit-7 are fixed all the time.

MSB

 

 

 

 

 

 

LSB

bit7

bit6

bit5

bit4

bit3

bit2

bit1

bit0

0

1

OUT6

OUT5

OUT4

OUT3

OUT2

OUT1

•LINE OUTPUT 7,8, RECOUT 1,2 ON/OFF (14th byte)

This command is used to turn ON/OFF the automatic mixer according to the output channels.

When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-4 to bit-7 are fixed all the time.

MSB

 

 

 

 

 

 

LSB

bit7

bit6

bit5

bit4

bit3

bit2

bit1

bit0

0

1

0

0

REC2

REC1

OUT8

OUT7

Example: When setting the respective parameters as shown below.

INPUT COMPRESSOR THRESHOLD

: –3 dB

INPUT COMPRESSOR RATIO

: 4:1

INPUT COMPRESSOR ATTACK TIME

: 33 ms

INPUT COMPRESSOR RELEASE TIME

: 100 ms

INPUT GATE THRESHOLD

: –25 dB

INPUT GATE HOLD TIME

: 1000 ms

INPUT GATE RELEASE TIME

: 470 ms

OUTPUT LIMITER THRESHOLD

: 10dB

OUTPUT LIMITER ATTACK TIME

: 0.47 ms

OUTPUT LIMITER RELEASE TIME

: 100 ms

FUNCTION ON/OFF

: Set DEFAULT/EDIT to EDIT, turn on NOM, and turn off ONLY ONE and

 

LAST ON.

MIC INPUT ON/OFF

: Turn on MIC 1-4, and turn off MIC 5, 6.

LINE OUTPUT1-6 ON/OFF

: Turn on LINE OUTPUT1-4, and turn off LINE OUTPUT5, 6.

LINE OUTPUT7-8, REC OUT 1,2 ON/OFF

: Turn on LINE OUTPUT7, 8, and turn off REC OUT1, 2.

43[H] 41[H] 4D[H] 50[H] 59[H] 37[H] 3E[H] 41[H] 43[H] 47[H] 45[H] 66[H] 34[H] 41[H] 4C[H] 4F[H] 4F[H] 43[H] 0D[H] ('C A M P Y 7 > A C G E f 4 A L O O C CR')

– 26 –

Page 25 Page 27
Image 26
Page 25 Page 27
Contents SRP-X700P Table of Contents Page RXD TXD DTR GND CTS OpenDelimiter 0DH ‘CR’ ACK 41H ‘A’NAK 4EH ‘N’ Channel Control S 43H 52H 43H 53H ‘CRCS’Packet format Channel 1st byte Remote commandFader Level 43H 4CH 56H 4CH Clvl Level Down 43H 4CH 56H 2DH ‘CLV-’ Fader level 2nd byteLine 4 Select 43H 53H 45H 4CH ‘CSEL’ Level UP 43H 4CH 56H 2BH ‘CLV+’Level UP/DOWN Stop 43H 4CH 56H 53H ‘CLVS’ Channel OFFParallel Output OFF 43H 50H 4FH 46H ‘CPOF’ Muting Cancel MuntingMuting 43H 4DH 55H 54H ‘CMUT’ MutingProjector Power Control 43H 50H 4AH 50H ‘CPJP’ Parallel Output on 43H 50H 4FH 4EH ‘CPON’Scene No Scene Recall 43H 52H 43H 4CH ‘CRCL’Status Request 52H 53H 54H 54H ‘RSTT’ Return packet formatMIC 2/WL 2 Level Meter Value FR Setup StatusMIC 1/WL 1 Level Meter Value MIC 3 Level Meter ValueMIC Over Gain MIC SwitchWL RF Line Input Over GainLine OUTPUT7,8 Over Gain MIC Input -∞Line OUTPUT1-6 Over Gain Line OUTPUT1-6 -∞Parallel INPUT1-6 CLIP/PROTECTIONGate Parallel INPUT7-12OUT10 OUT9 OUT8 OUT7 Parallel OUTPUT7-10Fader Value Fader ValueLine OUTPUT1-6 Muting MIC MutingLine Input Muting Line OUTPUT7,8/REC OUT1,2/SPEAKER Output 1,2 MutingScene Recall Group MutingLINE4 Select REMOTE6 REMOTE5 REMOTE4 REMOTE3 REMOTE2 REMOTE1Panel Lock FR Setup StatusLOCK/FADER Auto MIX 43H 41H 4DH 58H ‘CAMX’ Auto MIX Parameter Request 52H 41H 4DH 58H ‘RAMX’Auto MIX Edit Parameter 43H 41H 4DH 50H Camp Ratio Input Compressor Threshold 1st byteInput Compressor Ratio 2nd byte Input Gate Threshold 5th byte Input Compressor Attack Time 3rd byteInput Compressor Release Time 4th byte Output Limiter Threshold 8th byte Input Gate Hold Time 6th byteInput Gate Release Time 7th byte Output Limiter Attack Time 9th byteREC2 REC1 OUT8 OUT7 Line Output 1-6 ON/OFF 13th byteLine Output 7,8, Recout 1,2 ON/OFF 14th byte Factory Preset 43H 52H 53H 54H ‘CRST’ Auto MIX Edit Parameter Request 52H 41H 4DH 50H RampFirmware Version 1-7th byte FR Setup 43H 46H 52H 53H ‘CFRS’Firmware Version Request 52H 56H 45H 52H ‘RVER’ Scene No st byte Line Input fader 11th byte Index 2-9th byteMIC Input fader 10th byte Line OUTPUT1-6 fader 12th byteInformation 43H 49H 4EH 46H ‘CINF’ Power On Setting 1st byteDefault InformationInformation 2-129th byte Information Parameter Request 52H 49H 4EH 46H ‘RINF’Line 3 Input 43H 49H 4DH 33H ‘CIL3’ REF Level Trim 10th bytePEQ frequency 12 and 15th byte PEQGain Limit level 18th byte PEQ Q 13 and 16th bytePEQ gain 14 and 17th byte GainLine 3 Input Parameter Request 52H 49H 4DH 33H ‘RIL3’ Fader level 19th byteLine 4 Input 43H 49H 4DH 34H ‘CIL4’ Line 4 Input Parameter Request 52H 49H 4DH 34H ‘RIL4’Line OUTPUT1,2 43H 4FH 4CH 31H,32H ‘COL1,2’ REF Level 10th byte Delay 45th byteHCF PEQ Delay Line OUTPUT3-8 43H 4FH 4CH 33H-38H ‘COL3-8’ Line Output 1,2 Parameter Request52H 4FH 4DH 31H,32H ‘ROL1,2’ 12th PEQ1 Frequency 13th MIC Input 43H 49H 4DH 31H-36H ‘CIM1-6’ Line OUTPUT3-8 Parameter Request52H 4FH 4DH 33H-38H ‘ROL3-8’ FR2 Gain FR1 GainFUNCTIONON/OFF FR3 GainSoft Compressor 39th byteCompressor OFF MIDMIC Muting MIC Input Parameter Request 52H 49H 4DH 31H-36H ‘RIM1-6’MUTING/LINE4 Select 43H 4DH 54H 53H ‘CMTS’ LINE3,4 MutingLine OUTPUT1-6 Muting 4th byte MIC Muting 2nd byteLine Muting 3rd byte Speaker REC OUTPUT8 OUTPUT7 OUTPUT2 OUTPUT1 OUT2 OUT1Master Muting 6th byte MUTING/LINE4 Select Parameter Request52H 4DH 54H 53H ‘RMTS’ Group Fader Muting 7th bytePanel Lock 43H 4CH 43H 4BH ‘CLCK’ Parallel I/O 43H 50H 49H 4FH ‘CPIO’Recall FUNCTION1 NoneAV SEL LVL+SEL OverFUNCTION2 None Recall REC OUT Parallel I/O Parameter Request 52H 50H 49H 4FH RpioREC OUT 43H 4FH 52H 31H,32H ‘COR1,2’ REC OUT Parameter Request 52H 4FH 4DH 33H,32H ‘ROR1,2’ Remote 43H 53H 49H 4FH ‘CSIO’Control S I/F Type 15th byte LINE3-4F machine type 1, 3, 5, 7, 9, 11 and 13th byteLINE3-4F connection 2, 4, 6, 8, 10, 12 and 14th byte PJ Control 16th byteProjector protocol 23rd byte Video signal type 17th through 22nd byteRemote Parameter Request 52H 50H 49H 4FH ‘RPIO’ LINE4 D-E L Level LINE4 A-C,F R LevelMIC1/WL1 Level MIC2/WL2 LevelLINE3-LINE4 A-C ON/OFF 19th byte Level 2-17th byteMIC1/WL1-MIC6/LINE2 ON/OFF 18th byte LINE4 D,E ON/OFF 20th byteScene Index Request 52H 53H 43H 49H ‘RSCI’ Scene Parameter Request 52H 53H 43H 52H ‘RSTR’ Scene Recall Button 43H 52H 53H 41H ‘CRSA’ Scene Store 43H 53H 54H 52H ‘CSTR’ Scene Recall Button Parameter Request52H 52H 53H 41H ‘RRSA’ FUNCTION1Fader Group Output Muting Function Function 1, 2 10, 11th byteRouting Input Selector Fader Muting Function CH1, 2 selector 11, 21st byte Speaker Output 43H 4FH 53H 50H ‘COSP’Function ON/OFF 2nd byte ATT Level Speaker Output Parameter Request 52H 4FH 53H 50H ‘ROSP’ATT 12, 22nd byte
Related manuals
Manual 35 pages 50.56 Kb Manual 19 pages 16.39 Kb

RS-232C specifications

The Sony RS-232C is a renowned communication standard that has been widely utilized in various electronic devices, enabling serial communication between computers and peripheral devices. This protocol is integral in various applications, including industrial automation, medical equipment, and consumer electronics.

One of the main features of the Sony RS-232C is its simplicity and ease of use. The standard utilizes a basic serial communication method, allowing for asynchronous data transmission. This means that data can be sent one bit at a time over a single channel, ensuring reliable communication over short distances, typically up to 50 feet, although longer distances can be achieved with proper cable management and signal boosters.

The technology behind the RS-232C standard employs voltage levels to represent binary data. Logic level zero is represented by a voltage between -3 to -25 volts, while logic level one is between +3 to +25 volts. This voltage differential is crucial for distinguishing between 'on' and 'off' states in electronic signaling. The standard supports data rates of up to 115.2 kbps, making it suitable for various applications, although it is generally limited in speed when compared to modern communication standards like USB or Ethernet.

In terms of characteristics, the Sony RS-232C supports both full-duplex and half-duplex communication, allowing for simultaneous transmission and reception of data, or one-directional data transfer, respectively. The protocol also includes control signals for flow control, such as RTS (Request to Send) and CTS (Clear to Send), which help manage data transmission and prevent data loss due to buffer overflow.

The RS-232C standard has 25-pin and 9-pin connector configurations, although many devices now utilize the more compact 9-pin DIN format. This legacy standard remains prevalent in industrial settings, as many devices still use RS-232 connections.

Despite the emergence of more advanced communication protocols, the reliability and robustness of the Sony RS-232C ensure that it remains an enduring choice for numerous applications. Its straightforward configuration, coupled with extensive documentation and support, makes it a favorable option for both new installations and the maintenance of legacy systems in various industries. As technology continues to evolve, the RS-232C standard remains a testament to the enduring principles of reliable communication.
Top Page Image Contents