Roland FP-5 owner manual Adjusting the Sound’s Volume and Brilliance, Connecting Headphones

Page 10

Before You Play

■Turning Off the Power

1.Before switching the power off, turn the volume

all the way down by rotating the [Volume] knob.

fig.00-05

2.Press the [Power] switch on the back of the unit.

The power is switched off.

fig.00-07

Rear Panel

Upper Position

OFF

Adjusting the Sound’s Volume and Brilliance

fig.00-08

1.Use the [Volume] knob to adjust the overall volume level.

Rotating the knob clockwise increases the volume; counterclockwise rotation decreases it.

2.Use the [Brilliance] knob to adjust the overall sound quality.

Rotating the knob clockwise makes the tone brighter; rotating it counterclockwise makes the sound more subdued.

If the FP-5 is positioned against a wall, you will probably want to rotate the knob more to the left.

Connecting Headphones

Connecting headphones allows you to enjoy playing anytime, even at night, without concern.

* Headphones are not included. Consult your Roland dealer if you want to purchase.

fig.00-09

1.Plug the headphones into the Phones jack at the front, on the left side of the piano.

Use the [Volume] knob on the FP-5 to adjust the volume of the headphones.

* Make sure to use stereo headphones.

Some Notes on Using Headphones

•To prevent damage to the cord, handle the headphones only by the headset or the plug.

•The headphones may be damaged if the volume is too high when they are plugged in. Lower the volume on the FP-5 before plugging in the headphones.

•To prevent possible auditory damage, loss of hearing, or damage to the headphones, the headphones should not be used at an excessively high volume. Use the headphones at a moderate volume level.

10

Image 10

Contents Main Features Do not open or modify in any way the unit or its AC adaptor Protect the unit from strong impact. Do not drop it Maintenance Power SupplyPlacement Additional PrecautionsContents Panel Descriptions Front PanelRear Panel Panel DescriptionsBefore You Play Installing the Music StandMaking Connections Turning the Power On and Off Connecting PedalsTurning On the Power Turning Off the Power Adjusting the Sound’s Volume and BrillianceConnecting Headphones Some Notes on Using HeadphonesPlaying the Keyboard Hold down the Setup button and press the Split buttonListening to Demo Songs Playing Back All Songs Continuously All Song Play Listening to Internal SongsPlaying the Keyboard Listening to Each Part Separately Press the Play/Stop button to stop playbackPerforming with a Variety of Sounds Press one of the Tone buttons to choose a Tone GroupSimulating the Creation of Organ Tones Tone Wheel Mode What Are Feet?About the lighting of the Tone Wheel button indicators Selecting the Footage Changing volume of feetAbout Perc Percussion Hold down the Piano button and press the Strings/Pad Button Performing With Two Layered Tones Dual PlayExample Try Layering Piano and String Tones To exit Dual Play, press either Tone buttonPress the Piano button Press the Split button, getting its indicator to lightExample Let’s try split play with the piano tones To exit Split Play, press the Split button once moreChanging the Upper Tone Changing Tone Group and Tone variationChanging the Keyboard’s Split Point Changing the Lower ToneChanging the Volume Balance for Dual Play and Split Play Use the Balance knob to adjust the volume balancePress the or + buttons to select the touch Changing the Keyboard’s TouchHold down the Transpose button and press the Reverb Button Press the Transpose button or the Reverb buttonChanging the Depth of Reverb Effect Press the Reverb button, getting its indicator to lightAdding Reverberation to Sounds The Reverb Effect Hold down the Reverb button and press the or + ButtonAdding a Variety Effects to the Sound Press the Effects button, getting its indicator to lightChanging the Effect type Press the or + button to select the effect ResonanceAdding a Spinning Sound to Organ Tones Rotary Effect Changing the Depth of EffectHold down the Effects button and press the or + button Press the Organ button and select the organ toneChanging the Sound’s Pitch in Real Time Pedal Control What Pitch Bend and Modulation DoTransposing the Key of the Keyboard Key Transpose Changing the Tempo Using the MetronomePress the or + button to adjust the tempo Press the Metronome button to have the metronome soundChanging the Volume Changing the Beat of MetronomeWhat You Can Do With Session Partner What is Session Partner?Playing Along with Rhythms What are the FP-5’s Rhythms?Press the Start/Stop button Performing Along With Session PartnerPlaying Along with Rhythms Selecting PartsPress the or + button to select the Rhythm Changing the Volume of a PartSelecting a Rhythm Changing Rhythms As You PerformChanging a Rhythm’s Tempo Press the + and buttons to adjust the tempoSelecting a Rhythm’s Chord Progression To stop the Rhythm, press the Start/Stop button To exit, press the Chord Progression buttonHold down the Chord Progression button and press Rec button Recording the Chord Progression Chord ProgressionChanging the Stored Measure Count Hold down the Setup button and press the ether Tone Button Storing Settings SetupSelecting Stored Settings Press the Setup buttonsRecording a Performance Recording a PerformancePress the Rec button Recording a Performance Using Session Partner Press the Play/Stop button to stop recordingRecording a Performance Recording Selected Track buttonsRecording along with internal songs Erasing Recorded Performances Hold down the Song button and press the Rec buttonOther Functions How to make settingsPress one of the flashing buttons How the Soft PedalFC2 effects are applied Changing How the Pedal Effects Are AppliedChanging How the Pedals Work How the Sostenuto PedalFC1 effects are appliedChanging the Pitch Lower Tone in Octave Steps Octave Shift Setting the Part to Which Effects Are AddedChanging the Work of the Pedal Control Works of the Soft PedalFC2Tuning to Other Instruments’ Pitches Master Tuning Changing the Velocity When the Key Touch Is Set to FixedAdjusting the Tuning Temperament Press a key corresponding to the keynote Switch to Function mode, and press Metronome buttonChanging the Beat Pattern Press the or + button to change the beat divisionSetting the Chord Display on or off Setting the Intro and Ending on or offSetting the Root Note of the Chord Progression Fixing a Set Chord ProgressionAbout the FP-5 Sound Generator Connecting to Audio EquipmentConnection Examples Connectors Connecting to the USB ConnectorConnecting Midi Devices Making the ConnectionsMidi Send Channel Settings How to Enjoy MidiMidi Settings Switching Local Control On and OffPress the or + button to switch Local Control on and off Setting the Midi Out ModeSwitch to Function mode, and press the Song Button Switch to Function mode, and press the Play Stop buttonOther Functions Transferring the Program Change message Using the Pedal to Switch Setup Pedal shiftPress the or + button to select pedal setting Stop the external sequencerAdjust the volume Making the Settings for the USB DriverSwitch to Function mode, and press the Tone Wheel button Disabling Everything Except Piano Play Panel LockTroubleshooting Case Cause/What to doTroubleshooting SticksError Messages/Other Messages Display MeaningTone List RhythmTone List Tone WheelRhythm Set List Pop Drum Set Jazz Drum Set Vox Drum Set House Drum SetGM2 Room Set GM2 Power Set GM2 Electric Set GM2 Jazz Set GM2 Brush Set Rhythm List → Selecting a Rhythm’s Chord Progression pChord Progression Pattern List Chord ProgressionChord Progression Pattern List Chord Fingering List DM7Chord Fingering List GM7 AM7 Internal Song List → Listening to Demo Songs pInternal Song List Stored Settings Settings Stored in the SetupNot Stored Settings Power on Press the Key Easy Operation ListEasy Operation List 10 11 12 16 17 19 20Midi Implementation Chart Main Specifications Index Index Rec button 38-41Information Avis 03124823 ’05-2-7N