Roland FP-5 Listening to Each Part Separately, Press the Play/Stop button to stop playback

Page 13

Chapter 1 Playing the Keyboard

When the following appears in the display

If there is any performance data stored in the FP-5’s memory, the following appears in the display.

fig.01-03

flash in red

Until you erase the performance data, you cannot play back an internal song.

To erase the performance data and play back the internal song, press the [Rec] button.

If you don’t want to erase the song, press the [Play/Stop] or [Song] button.

■Listening to Each Part Separately

With the internal songs, you can select the performance part that is to be played back.

You can also practice each hand separately while playing along with the song.

1. Select the song to be played back.

2. Hold down the [Play/Stop] button and press either [Bass (1)] button or [Chord(2)] button to select the part for which you want the sound to not be played.

The indicator on the selected button goes out.

The performance data is assigned to the Track buttons as shown below.

fig.01-05

Left-hand Right-hand

Part Part

When you release the [Play/Stop] button, the song is played back. The sound for the performance part selected in Step 2 is not played. Temporarily preventing the sounds of a specified part from playing is called “muting.”

3. Hold down the [Play/Stop] button and press the button

selected in Step 2.

The sound of the muted part is then played.

4. Press the [Play/Stop] button to stop playback.

Changing the song cancels

the mute setting.

13

Image 13

Contents Main Features Do not open or modify in any way the unit or its AC adaptor Protect the unit from strong impact. Do not drop it Placement Power SupplyMaintenance Additional PrecautionsContents Front Panel Panel DescriptionsPanel Descriptions Rear PanelBefore You Play Installing the Music StandMaking Connections Turning the Power On and Off Connecting PedalsTurning On the Power Connecting Headphones Adjusting the Sound’s Volume and BrillianceTurning Off the Power Some Notes on Using HeadphonesPlaying the Keyboard Hold down the Setup button and press the Split buttonListening to Demo Songs Playing Back All Songs Continuously All Song Play Listening to Internal SongsPlaying the Keyboard Press the Play/Stop button to stop playback Listening to Each Part SeparatelyPress one of the Tone buttons to choose a Tone Group Performing with a Variety of SoundsWhat Are Feet? Simulating the Creation of Organ Tones Tone Wheel ModeAbout the lighting of the Tone Wheel button indicators Selecting the Footage Changing volume of feetAbout Perc Percussion Example Try Layering Piano and String Tones Performing With Two Layered Tones Dual PlayHold down the Piano button and press the Strings/Pad Button To exit Dual Play, press either Tone buttonExample Let’s try split play with the piano tones Press the Split button, getting its indicator to lightPress the Piano button To exit Split Play, press the Split button once moreChanging the Keyboard’s Split Point Changing Tone Group and Tone variationChanging the Upper Tone Changing the Lower ToneUse the Balance knob to adjust the volume balance Changing the Volume Balance for Dual Play and Split PlayHold down the Transpose button and press the Reverb Button Changing the Keyboard’s TouchPress the or + buttons to select the touch Press the Transpose button or the Reverb buttonAdding Reverberation to Sounds The Reverb Effect Press the Reverb button, getting its indicator to lightChanging the Depth of Reverb Effect Hold down the Reverb button and press the or + ButtonAdding a Variety Effects to the Sound Press the Effects button, getting its indicator to lightChanging the Effect type Resonance Press the or + button to select the effectHold down the Effects button and press the or + button Changing the Depth of EffectAdding a Spinning Sound to Organ Tones Rotary Effect Press the Organ button and select the organ toneWhat Pitch Bend and Modulation Do Changing the Sound’s Pitch in Real Time Pedal ControlTransposing the Key of the Keyboard Key Transpose Press the or + button to adjust the tempo Using the MetronomeChanging the Tempo Press the Metronome button to have the metronome soundChanging the Beat of Metronome Changing the VolumePlaying Along with Rhythms What is Session Partner?What You Can Do With Session Partner What are the FP-5’s Rhythms?Playing Along with Rhythms Performing Along With Session PartnerPress the Start/Stop button Selecting PartsSelecting a Rhythm Changing the Volume of a PartPress the or + button to select the Rhythm Changing Rhythms As You PerformChanging a Rhythm’s Tempo Press the + and buttons to adjust the tempoSelecting a Rhythm’s Chord Progression To exit, press the Chord Progression button To stop the Rhythm, press the Start/Stop buttonHold down the Chord Progression button and press Rec button Recording the Chord Progression Chord ProgressionChanging the Stored Measure Count Selecting Stored Settings Storing Settings SetupHold down the Setup button and press the ether Tone Button Press the Setup buttonsRecording a Performance Recording a PerformancePress the Rec button Press the Play/Stop button to stop recording Recording a Performance Using Session PartnerRecording a Performance Recording Selected Track buttonsRecording along with internal songs Hold down the Song button and press the Rec button Erasing Recorded PerformancesOther Functions How to make settingsPress one of the flashing buttons Changing How the Pedals Work Changing How the Pedal Effects Are AppliedHow the Soft PedalFC2 effects are applied How the Sostenuto PedalFC1 effects are appliedChanging the Work of the Pedal Control Setting the Part to Which Effects Are AddedChanging the Pitch Lower Tone in Octave Steps Octave Shift Works of the Soft PedalFC2Tuning to Other Instruments’ Pitches Master Tuning Changing the Velocity When the Key Touch Is Set to FixedAdjusting the Tuning Temperament Changing the Beat Pattern Switch to Function mode, and press Metronome buttonPress a key corresponding to the keynote Press the or + button to change the beat divisionSetting the Root Note of the Chord Progression Setting the Intro and Ending on or offSetting the Chord Display on or off Fixing a Set Chord ProgressionAbout the FP-5 Sound Generator Connecting to Audio EquipmentConnection Examples Connecting Midi Devices Connecting to the USB ConnectorConnectors Making the ConnectionsMidi Settings How to Enjoy MidiMidi Send Channel Settings Switching Local Control On and OffSwitch to Function mode, and press the Song Button Setting the Midi Out ModePress the or + button to switch Local Control on and off Switch to Function mode, and press the Play Stop buttonPress the or + button to select pedal setting Using the Pedal to Switch Setup Pedal shiftOther Functions Transferring the Program Change message Stop the external sequencerSwitch to Function mode, and press the Tone Wheel button Making the Settings for the USB DriverAdjust the volume Disabling Everything Except Piano Play Panel LockCase Cause/What to do TroubleshootingSticks TroubleshootingDisplay Meaning Error Messages/Other MessagesRhythm Tone ListTone Wheel Tone ListPop Drum Set Jazz Drum Set Vox Drum Set House Drum Set Rhythm Set ListGM2 Room Set GM2 Power Set GM2 Electric Set GM2 Jazz Set GM2 Brush Set → Selecting a Rhythm’s Chord Progression p Rhythm ListChord Progression Chord Progression Pattern ListChord Progression Pattern List DM7 Chord Fingering ListChord Fingering List GM7 AM7 → Listening to Demo Songs p Internal Song ListInternal Song List Stored Settings Settings Stored in the SetupNot Stored Settings Easy Operation List Power on Press the Key10 11 12 16 17 19 20 Easy Operation ListMidi Implementation Chart Main Specifications Index Rec button 38-41 IndexInformation Avis 03124823 ’05-2-7N