Roland FP-5 owner manual Example Let’s try split play with the piano tones, Press the Piano button

Page 19

Chapter 1 Playing the Keyboard

Performing With Different Tones in the Left and Right Sides of the Keyboard (Split Play)

Performing with the keyboard divided at a certain key into a left side and a right side is called “Split Play,” and the point at which the keyboard is divided is called the “split point.”

In Split Play, you can have a different tone sound in the left and right sides.

When the instrument is turned on, the split point is set to “F 3.” The split point key is included in the left side.

While in Split Play, a sound played in the right side is called an “Upper Tone,” and the sound played in the left side is called a “Lower Tone.”

Example: Let’s try split play with the piano tones.

fig.01-11

You can specify which part is to have priority when the effects assigned to the Upper Tone and Lower Tone differ. Refer to “Setting the Part to Which Effects Are Added” (p. 44).

2,3 1

1. Press the [Piano] button.

Now, the piano tone is selected.

2. Press the [Split] button, getting its indicator to light.

The keyboard is divided into upper and lower sections.

fig.01-12

F 3 (Split Point)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lower Tone

 

 

 

 

 

 

 

 

 

Upper Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The right-hand section of the keyboard plays piano tone, and the left-hand section plays A. Bass+Ride tone.

You can play a tone for the right side (the Upper Tone) before splitting the keyboard.

The Tone button’s indicator lights in red for the Upper Tone, and in green for the Lower Tone.

3. To exit Split Play, press the [Split] button once more.

The [Split] button’s indicator light goes out and the upper tone becomes the tone for the entire keyboard.

You can vary the volume- level balance of the two tones. Take a look at “Changing the Volume Balance for Dual Play and Split Play” (p. 21).

When the “Tone Wheel” tone is selected to the Lower Tone, the [Tone Wheel] button’s indicator light in red (p. 16).

When you switch from Dual Play (p. 18) to Split Play, the Upper Tone used in Dual Play is selected as the Upper Tone for Split Play.

19

Image 19
Contents Main Features Do not open or modify in any way the unit or its AC adaptor Protect the unit from strong impact. Do not drop it Additional Precautions Power SupplyPlacement MaintenanceContents Front Panel Panel DescriptionsPanel Descriptions Rear PanelBefore You Play Installing the Music StandMaking Connections Turning the Power On and Off Connecting PedalsTurning On the Power Some Notes on Using Headphones Adjusting the Sound’s Volume and BrillianceConnecting Headphones Turning Off the PowerPlaying the Keyboard Hold down the Setup button and press the Split buttonListening to Demo Songs Playing Back All Songs Continuously All Song Play Listening to Internal SongsPlaying the Keyboard Press the Play/Stop button to stop playback Listening to Each Part SeparatelyPress one of the Tone buttons to choose a Tone Group Performing with a Variety of SoundsWhat Are Feet? Simulating the Creation of Organ Tones Tone Wheel ModeAbout the lighting of the Tone Wheel button indicators Selecting the Footage Changing volume of feetAbout Perc Percussion To exit Dual Play, press either Tone button Performing With Two Layered Tones Dual PlayExample Try Layering Piano and String Tones Hold down the Piano button and press the Strings/Pad ButtonTo exit Split Play, press the Split button once more Press the Split button, getting its indicator to lightExample Let’s try split play with the piano tones Press the Piano buttonChanging the Lower Tone Changing Tone Group and Tone variationChanging the Keyboard’s Split Point Changing the Upper ToneUse the Balance knob to adjust the volume balance Changing the Volume Balance for Dual Play and Split PlayPress the Transpose button or the Reverb button Changing the Keyboard’s TouchHold down the Transpose button and press the Reverb Button Press the or + buttons to select the touchHold down the Reverb button and press the or + Button Press the Reverb button, getting its indicator to lightAdding Reverberation to Sounds The Reverb Effect Changing the Depth of Reverb EffectAdding a Variety Effects to the Sound Press the Effects button, getting its indicator to lightChanging the Effect type Resonance Press the or + button to select the effectPress the Organ button and select the organ tone Changing the Depth of EffectHold down the Effects button and press the or + button Adding a Spinning Sound to Organ Tones Rotary EffectWhat Pitch Bend and Modulation Do Changing the Sound’s Pitch in Real Time Pedal ControlTransposing the Key of the Keyboard Key Transpose Press the Metronome button to have the metronome sound Using the MetronomePress the or + button to adjust the tempo Changing the TempoChanging the Beat of Metronome Changing the VolumeWhat are the FP-5’s Rhythms? What is Session Partner?Playing Along with Rhythms What You Can Do With Session PartnerSelecting Parts Performing Along With Session PartnerPlaying Along with Rhythms Press the Start/Stop buttonChanging Rhythms As You Perform Changing the Volume of a PartSelecting a Rhythm Press the or + button to select the RhythmChanging a Rhythm’s Tempo Press the + and buttons to adjust the tempoSelecting a Rhythm’s Chord Progression To exit, press the Chord Progression button To stop the Rhythm, press the Start/Stop buttonHold down the Chord Progression button and press Rec button Recording the Chord Progression Chord ProgressionChanging the Stored Measure Count Press the Setup buttons Storing Settings SetupSelecting Stored Settings Hold down the Setup button and press the ether Tone ButtonRecording a Performance Recording a PerformancePress the Rec button Press the Play/Stop button to stop recording Recording a Performance Using Session PartnerRecording a Performance Recording Selected Track buttonsRecording along with internal songs Hold down the Song button and press the Rec button Erasing Recorded PerformancesOther Functions How to make settingsPress one of the flashing buttons How the Sostenuto PedalFC1 effects are applied Changing How the Pedal Effects Are AppliedChanging How the Pedals Work How the Soft PedalFC2 effects are appliedWorks of the Soft PedalFC2 Setting the Part to Which Effects Are AddedChanging the Work of the Pedal Control Changing the Pitch Lower Tone in Octave Steps Octave ShiftTuning to Other Instruments’ Pitches Master Tuning Changing the Velocity When the Key Touch Is Set to FixedAdjusting the Tuning Temperament Press the or + button to change the beat division Switch to Function mode, and press Metronome buttonChanging the Beat Pattern Press a key corresponding to the keynoteFixing a Set Chord Progression Setting the Intro and Ending on or offSetting the Root Note of the Chord Progression Setting the Chord Display on or offAbout the FP-5 Sound Generator Connecting to Audio EquipmentConnection Examples Making the Connections Connecting to the USB ConnectorConnecting Midi Devices ConnectorsSwitching Local Control On and Off How to Enjoy MidiMidi Settings Midi Send Channel SettingsSwitch to Function mode, and press the Play Stop button Setting the Midi Out ModeSwitch to Function mode, and press the Song Button Press the or + button to switch Local Control on and offStop the external sequencer Using the Pedal to Switch Setup Pedal shiftPress the or + button to select pedal setting Other Functions Transferring the Program Change messageDisabling Everything Except Piano Play Panel Lock Making the Settings for the USB DriverSwitch to Function mode, and press the Tone Wheel button Adjust the volumeCase Cause/What to do TroubleshootingSticks TroubleshootingDisplay Meaning Error Messages/Other MessagesRhythm Tone ListTone Wheel Tone ListPop Drum Set Jazz Drum Set Vox Drum Set House Drum Set Rhythm Set ListGM2 Room Set GM2 Power Set GM2 Electric Set GM2 Jazz Set GM2 Brush Set → Selecting a Rhythm’s Chord Progression p Rhythm ListChord Progression Chord Progression Pattern ListChord Progression Pattern List DM7 Chord Fingering ListChord Fingering List GM7 AM7 → Listening to Demo Songs p Internal Song ListInternal Song List Stored Settings Settings Stored in the SetupNot Stored Settings Easy Operation List Power on Press the Key10 11 12 16 17 19 20 Easy Operation ListMidi Implementation Chart Main Specifications Index Rec button 38-41 IndexInformation Avis 03124823 ’05-2-7N