Roland FP-5 Making the Settings for the USB Driver, Press the or + buttons to select the driver

Page 53

Chapter 4 Other Functions

Making the Settings for the USB Driver

If you intend to connect to a computer using the USB connector, you need to make the following setting before you make the connection.

1.Switch to Function mode, and press the [Tone

Wheel] button.

fig.04-04

flashes in red

2.Press the [-] or [+] buttons to select the driver.

Indication	Description


vdr	Select this when using the supplied
(Vender)	driver with a USB connection.

GEn	Select this when using a generic USB
(Generic)	driver included with the OS with a
	USB connection.

Restoring the settings to the factory condition (Factory Reset)

The settings stored in the FP-5 can be returned to their factory settings.

*Executing “Factory Reset” results in deletion of the Settings. If you want to keep any data you have stored, use the “Bulk Dump” operation to save the data to an external sequencer (p. 52).

1.Turn the volume to the minimum, and press the [Power] switch to turn off the power.

2.Hold down the [Pedal control] button, and press the [Power] switch to turn on the power.

Continue pressing the button until “Fct” appears in the

display.

fig.04-04

After “Fct” is displayed, the screen and buttons go back

to normal.

Disabling Everything Except Piano Play (Panel Lock)

The “Panel Lock” function locks the FP-5 in a state where only piano performance can be used, and all buttons will be disabled. This prevents the settings from being inadvertently modified even if children press the buttons accidentally.

1.Turn the volume to the minimum, and press the [Power] switch to turn off the power.

2.Hold down the [Piano] button and press the [Power] switch to turn on the power.

Then, continue to hold down these two buttons by

following display will appear.

fig.disp—-

3.Adjust the volume.

When you play the keyboard, the grand piano sound will be heard.

It cannot be changed to another tone.

4.To defeat the Panel Lock function, turn the volume down to the minimum, and turn on the power once again.

53

Image 53

Contents Main Features Do not open or modify in any way the unit or its AC adaptor Protect the unit from strong impact. Do not drop it Placement Power SupplyMaintenance Additional PrecautionsContents Front Panel Panel DescriptionsPanel Descriptions Rear PanelMaking Connections Installing the Music StandBefore You Play Turning On the Power Connecting PedalsTurning the Power On and Off Connecting Headphones Adjusting the Sound’s Volume and BrillianceTurning Off the Power Some Notes on Using HeadphonesListening to Demo Songs Hold down the Setup button and press the Split buttonPlaying the Keyboard Playing the Keyboard Listening to Internal SongsPlaying Back All Songs Continuously All Song Play Press the Play/Stop button to stop playback Listening to Each Part SeparatelyPress one of the Tone buttons to choose a Tone Group Performing with a Variety of SoundsWhat Are Feet? Simulating the Creation of Organ Tones Tone Wheel ModeAbout the lighting of the Tone Wheel button indicators About Perc Percussion Changing volume of feetSelecting the Footage Example Try Layering Piano and String Tones Performing With Two Layered Tones Dual PlayHold down the Piano button and press the Strings/Pad Button To exit Dual Play, press either Tone buttonExample Let’s try split play with the piano tones Press the Split button, getting its indicator to lightPress the Piano button To exit Split Play, press the Split button once moreChanging the Keyboard’s Split Point Changing Tone Group and Tone variationChanging the Upper Tone Changing the Lower ToneUse the Balance knob to adjust the volume balance Changing the Volume Balance for Dual Play and Split PlayHold down the Transpose button and press the Reverb Button Changing the Keyboard’s TouchPress the or + buttons to select the touch Press the Transpose button or the Reverb buttonAdding Reverberation to Sounds The Reverb Effect Press the Reverb button, getting its indicator to lightChanging the Depth of Reverb Effect Hold down the Reverb button and press the or + ButtonChanging the Effect type Press the Effects button, getting its indicator to lightAdding a Variety Effects to the Sound Resonance Press the or + button to select the effectHold down the Effects button and press the or + button Changing the Depth of EffectAdding a Spinning Sound to Organ Tones Rotary Effect Press the Organ button and select the organ toneWhat Pitch Bend and Modulation Do Changing the Sound’s Pitch in Real Time Pedal ControlTransposing the Key of the Keyboard Key Transpose Press the or + button to adjust the tempo Using the MetronomeChanging the Tempo Press the Metronome button to have the metronome soundChanging the Beat of Metronome Changing the VolumePlaying Along with Rhythms What is Session Partner?What You Can Do With Session Partner What are the FP-5’s Rhythms?Playing Along with Rhythms Performing Along With Session PartnerPress the Start/Stop button Selecting PartsSelecting a Rhythm Changing the Volume of a PartPress the or + button to select the Rhythm Changing Rhythms As You PerformSelecting a Rhythm’s Chord Progression Press the + and buttons to adjust the tempoChanging a Rhythm’s Tempo To exit, press the Chord Progression button To stop the Rhythm, press the Start/Stop buttonChanging the Stored Measure Count Recording the Chord Progression Chord ProgressionHold down the Chord Progression button and press Rec button Selecting Stored Settings Storing Settings SetupHold down the Setup button and press the ether Tone Button Press the Setup buttonsPress the Rec button Recording a PerformanceRecording a Performance Press the Play/Stop button to stop recording Recording a Performance Using Session PartnerRecording along with internal songs Recording Selected Track buttonsRecording a Performance Hold down the Song button and press the Rec button Erasing Recorded PerformancesPress one of the flashing buttons How to make settingsOther Functions Changing How the Pedals Work Changing How the Pedal Effects Are AppliedHow the Soft PedalFC2 effects are applied How the Sostenuto PedalFC1 effects are appliedChanging the Work of the Pedal Control Setting the Part to Which Effects Are AddedChanging the Pitch Lower Tone in Octave Steps Octave Shift Works of the Soft PedalFC2Adjusting the Tuning Temperament Changing the Velocity When the Key Touch Is Set to FixedTuning to Other Instruments’ Pitches Master Tuning Changing the Beat Pattern Switch to Function mode, and press Metronome buttonPress a key corresponding to the keynote Press the or + button to change the beat divisionSetting the Root Note of the Chord Progression Setting the Intro and Ending on or offSetting the Chord Display on or off Fixing a Set Chord ProgressionConnection Examples Connecting to Audio EquipmentAbout the FP-5 Sound Generator Connecting Midi Devices Connecting to the USB ConnectorConnectors Making the ConnectionsMidi Settings How to Enjoy MidiMidi Send Channel Settings Switching Local Control On and OffSwitch to Function mode, and press the Song Button Setting the Midi Out ModePress the or + button to switch Local Control on and off Switch to Function mode, and press the Play Stop buttonPress the or + button to select pedal setting Using the Pedal to Switch Setup Pedal shiftOther Functions Transferring the Program Change message Stop the external sequencerSwitch to Function mode, and press the Tone Wheel button Making the Settings for the USB DriverAdjust the volume Disabling Everything Except Piano Play Panel LockCase Cause/What to do TroubleshootingSticks TroubleshootingDisplay Meaning Error Messages/Other MessagesRhythm Tone ListTone Wheel Tone ListPop Drum Set Jazz Drum Set Vox Drum Set House Drum Set Rhythm Set ListGM2 Room Set GM2 Power Set GM2 Electric Set GM2 Jazz Set GM2 Brush Set → Selecting a Rhythm’s Chord Progression p Rhythm ListChord Progression Chord Progression Pattern ListChord Progression Pattern List DM7 Chord Fingering ListChord Fingering List GM7 AM7 → Listening to Demo Songs p Internal Song ListInternal Song List Not Stored Settings Settings Stored in the SetupStored Settings Easy Operation List Power on Press the Key10 11 12 16 17 19 20 Easy Operation ListMidi Implementation Chart Main Specifications Index Rec button 38-41 IndexInformation Avis 03124823 ’05-2-7N