Troubleshooting
Symptom | Cause | |
| ● The | |
| using the | |
| ● The REAC connection has not been established (p. 20). Check whether there might be a problem | |
No sound. | with the REAC cable or connections. | |
● The settings for the source/level or Source Assign, made on either the | ||
| ||
| inappropriate (p. | |
| In situations where an | |
| Assign can be modified by means of a Recall from memory (p. 31) or a Factory Reset (p. 31). | |
|
| |
Can’t adjust the audio that you want to | ● The source you’re trying to adjust is not assigned to a group. | |
monitor. | ||
| ||
|
| |
Pressing the [SOLO] button does not do | ● The Solo mode setting has been changed from the | |
what you expect. | ||
| ||
|
| |
Can’t perform recall/store operations. | ● Recall/store operations on the | |
|
| |
The volume level of the instrument | ● You are using a connection cable that contains a | |
connected to the AUX IN L/R jack is too | ||
not contain a resistor. | ||
low. | ||
| ||
|
|
For EU Countries
34