Pioneer Stereo Receiver Displays & Controls for VSX-D710S, VSX-D810S, and VSX-D850S Models
Page 23

Displays & Controls

Display

 

 

 

 

 

 

1 2 3 4 5 6 7 8 9 0 -

 

=

SIGNAL SELECT

DIGITAL

SB

ATT DIRECT

MONITOR

 

 

DIGITAL DTS

PRO LOGIC DSP

MIDNIGHT

SP AB TUNED

ANALOG DIGITAL

 

DNR

LOUDNESS MONO

STEREO

 

 

 

 

 

 

dB

 

@

 

 

 

!

~

1SIGNAL SELECT indicators

Light to indicate the type of input signal assigned for the current component (see “Front Panel“, 0 SIGNAL SELECT). When the AUTO setting is being used on VSX-D810S & VSX-D850S receivers a set of brackets will appear around the SIGNAL SELECT indicators.

2DIGITAL : Lights when a DOLBY DIGITAL signal is played.

DTS: Lights when a source with DTS audio signals is played.

ANALOG : Lights when an analog signal is selected.

DIGITAL : Lights when a digital audio signal is selected.

[ ]: Lights when the AUTO setting is selected. (VSX-

D810S/D850S only)

2DTS indicator

Lights when DTS mode is being used.

3 2 DIGITAL indicator

When the 2(DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Digital signal. However, 2PRO LOGIC lights during 2 channel playback of Dolby Digital.

4 2 PRO LOGIC indicator

When the 2(DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Pro Logic source.

5DSP indicator

Lights when any Advanced Theater or DSP mode is selected.

6Surround Back indicator (VSX-D810S/D850S only) Lights when most Surround Back channel flag encoded (6.1channel) software is playing. (With some Surround Back channel software the surround back indicator won’t light because there is no flag encoded in the software.) If you play DTS 5.1/6.1 channel software surround sound will be heard whether it is encoded with a surround back channel flag or not.

7OVERLOAD indicator

This lights when an analog signal is too strong (the SIGNAL SELECT needs to be on ANALOG). It indicates the sound is distorting and the input signal should be reduced.

8ATT indicator

Lights when ATT is used to attenuate (reduce) the level of the input signal (can only be used in ANALOG mode).

9DIRECT indicator

Lights when source DIRECT is in use. This function bypasses all tone, channel levels, DSP and Dolby Surround effects.

MIDNIGHT indicator

Lights when MIDNIGHT listening mode is in use.

LOUDNESS indicator

Lights when the LOUDNESS is on. LOUDNESS is used to boost the bass and treble when listening at

low levels.

0SPEAKER indicator

Shows if the speaker system is on or not. SP 3A (and/or) B means speakers are switched on. SP 3 means speakers are switched off.

-MONITOR indicator

Lights when MONITOR is selected to hear a recording as it's being made (see page 34).

=TUNER indicators

MONO:

Lights when the mono mode is set using the MPX MODE button.

TUNED:

Lights when a broadcast is being received.

STEREO:

Lights when a stereo FM broadcast is being received in auto stereo mode.

~MASTER VOLUME LEVEL

Shows the overall volume level. Volume level is maintained even when the power is off. ---dBindicates the minimum level, and 0dB indicates the maximum level.

•Depending on the level settings you make for

individual channels, the MAX level can range between –10dB and 0dB.

!DNR indicator (VSX-D810S/D850S only)

Lights when the digital noise reduction is on. Use to

reduce extraneous noise. It can be used with any sound mode.

@CHARACTER display

Shows the radio frequency or function (DVD/LD, CD, etc.) receiver is using.

23

En

Page 22 Page 24
Image 23
Page 22 Page 24
Contents VSX-D710SVSX-D810SVSX-D850S Standby Position For Canadian modelImportant Safety Instructions Introductory Information Contents Digital Audio Cords/Optical Cables Connecting Your EquipmentAudio/Video Cords Memo Connecting Your EquipmentExample Connection for a DVD/LD or LD Player Cassette deck placement Depending on where the cassette Connecting Audio ComponentsWoofer Center OUT Connecting DVD 7.1 Channel 5.1 ch for VSX-D710S ComponentsFront Connecting Video ComponentsTo improve AM reception Using External AntennasAM loop antenna FM wire antenna To improve FM receptionFront Speakers a Center Speaker Surround Speakers Connecting Speakers VSX-D710SFront Speakers a Center Speaker Connecting Speakers VSX-D810S/D850SView of speaker set up Hints on Speaker PlacementConnecting Your Equipment Speaker terminals Overhead view of speaker set up ~VSX-D710S~Do not Connect a Monitor or TV SET to this Units AC Outlet Connecting Additional Amplifiers VSX-D810S/D850S onlyAC Outlet switched 100 W 0.8 a max Preparations Setting Up for Surround SoundChoose DTS-ES on or OFF by using the % or fi buttons Speakers Front, Center, Surround setting modeCrossover frequency setting mode Preparations Subwoofer ON/PLUS/OFF setting modeLFE attenuator setting mode Low cut filter ON/OFF setting modeDual mono setting Preparations Surround speakers distance setting modeDynamic range control setting mode Coaxial digital input setting Preparations Component input 1 settingOptical digital input 1 setting Component input 2 settingPress Test Tone to turn off the test tone Press Test Tone to output the test toneDisplays & Controls Master VolumeDisplays & Controls ~ Master Volume LevelDisplay ATT Master Volume +/- buttons Signal Select seeSetup button see TV Volume +/- buttonsVSX-D850S only Advanced Theater modes Standard modeSound Modes Learning about the Sound ModesDance Sound Modes DSP modesHall JazzSound Modes Press Signal Select to select DigitalSurround operation Selecting a Sound ModeAdvanced Theater mode Dolby/ DTS mode Press DSP Mode to select the sound modePress Midnight Midnight Listening ModeFinding a Station Using the TunerTuning Directly to a Station MPX modeRecalling Memorized Stations Using the TunerMemorizing Stations Making a Digital Recording Making a RecordingMaking an Audio or a Video Recording Record MonitorControlling the Rest of Your System Recalling Preset CodesTo cancel the preset mode at any time Press Setup Controlling the Rest of Your System Switch on the component you want to controlPress and hold Setup for three seconds Press and hold Setup for two secondsUse the % fi buttons to select the brand of the component Use the @ # buttons to select the Full Library Search modeTo program additional operations for the current component Press Setup and hold for three secondsTo cancel the Learning mode at any time Press Setup To cancel Learning setup modePress the button to be cleared for three seconds Use the @ # buttons to select the Erase modeDirect Function Use the number buttons to enterPress the Multi Control button you Checking Preset CodesWant to check the preset code for Operating other Pioneer ComponentsButtons Function Components CD/MD/CD-R/VCR/DVD/LD/DVR Player/Cassette Deck ControlsTV Func Cable TV/Satellite TV/TV/DTV ControlsManufacturer Code Preset Code ListGrundig MD Player Misc Audio TAE Kwang Satellite Tuner Cable TV Additional Information TroubleshootingAdditional Information SpecificationsWe Want You Listening For a Lifetime
Top Page Image Contents