Memorizing Stations, Using the Tuner | Pioneer VSX-D850S, VSX-D810S

Using the Tuner

Memorizing Stations

If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. The VSX-D710S/D810S/D850S can memorize up to 30 stations, stored in three banks, or classes, (A,B and C) of 10 stations each. When memorizing FM frequencies, the receiver also stores the MPX setting (auto stereo or mono, see p.32). The process for memorizing stations is only possible from the controls on the front panel of the receiver.

3 4

VSX-D710S

1Tune to a station you want to memorize.

See Finding a Station and Tuning Directly to a Station, on pages 32 and this page, for more on how to do this.

2Press MEMORY.

The display shows a blinking memory class.

TUNED

SP A STEREO

3Press CLASS to select one of the three classes.

Repeatedly pressing this button cycles through the three available classes, A, B and C.

4Press STATION +/– to select the desired station memory number.

Pressing these buttons repeatedly cycles through the 10 available station memories in each class.

After choosing the location you want, the preset class and number blink for about 5 seconds and the receiver stores the station.

Repeat steps 1 to 4 to memorize up to 30 stations.

Recalling Memorized Stations

Having memorized up to 30 stations (see the previous explanation for how to do this), preset stations can be easily recalled.

SOURCE			RECEIVER
DVD	TV	VCR	CD-R	1
	MULTI CONTROL			1
RCV	CD	TUN	TVC

1 2 3

MIDNIGHT	5.1 / 7.1	ATT	3
4	5	6
	EFFECT
7	8	9
10		DISC
	0	ENTER
DTV INFO MPX/RETURN D.ACCESS		GUIDE

¶7 3 8

2	BAND	CLASS	DTV ON/OFF	DTV MENU
	1	¡	4	¢
	2/DTS	DSP	TEST TONE	SIGNAL SELECT

CH SELECT CH LEVELFUNCTION

LOUDNESS	FL DIMMER	SETUP	MUTING	3
	TUNE			3
ST			ST
	ENTER
	TUNE
	CHANNEL
VOLUME		MASTER VOLUME
	MENU
2	3			1

VSX-D710S

1Press the MULTI CONTROL TUN button on the remote control.

On the receiver, use the MULTI JOG to select the tuner mode.

2Press CLASS to select the class in which the station is stored.

Repeatedly pressing this button cycles through the three available classes, A, B and C.

3Use the ST +/– buttons to select the station memory in which the station is stored.

Alternatively, recall the station memory using the number buttons on the remote control.

MEMO:

•If the receiver is left disconnected from the AC power outlet for a lengthy period, the station memories will be lost and will have to be reprogrammed.