07Using the Tuner
Finding a Station
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the exact frequency of the station you want to listen to, see Tuning Directly to a Station on this page. Once you are tuned to a station you can memorize the frequency for recall
SOURCE |
|
| RECEIVER |
|
DVD | TV | VCR | 1 | |
| MULTI CONTROL |
| ||
RCV | CD | TUN | TVC | |
1 2 3
MIDNIGHT | 5.1 / 7.1 | ATT |
4 | 5 | 6 |
| EFFECT |
|
7 | 8 | 9 |
10 |
| DISC |
| 0 | ENTER |
DTV INFO MPX/RETURN D.ACCESS | GUIDE | |
MPX ¶ 
7 3 8
BAND | CLASS | DTV ON/OFF DTV MENU |
2 | 1 | ¡ | 4 ¢ |
| 2/DTS | DSP | TEST TONE SIGNAL SELECT |
CH SELECT CH LEVELFUNCTION
LOUDNESS FL DIMMER | SETUP | MUTING |
| TUNE |
|
|
ST |
| ST | 3 |
| ENTER |
| |
| TUNE |
|
|
| CHANNEL |
|
|
VOLUME |
| MASTER VOLUME |
|
1Press the MULTI CONTROL TUN button on the remote control.
On the receiver, use the MULTI JOG to select the tuner mode.
2Use the BAND button to change the band (FM or AM), if necessary.
Each press switches the band between FM and AM On the receiver, pressing the BAND button switches between bands.
3Tune to a station.
Automatic tuning
To search for stations in the currently selected band, press and hold either the TUNE + or TUNE – button for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat this step to search for other stations.
Manual tuning
To change the frequency one step at a time, press the TUNE + or TUNE – (%fi) buttons.
High speed tuning
Press and hold the TUNE + or TUNE – button for high speed tuning, releasing the button once the desired frequency is reached.
32
En
MPX mode
If the TUNED or STEREO indicators don't light when tuning to an FM station because the signal is weak, press the MPX button to switch the receiver into mono reception mode. This should improve the sound quality and allow you to enjoy the broadcast.
Tuning Directly to a Station
Sometimes, you'll already know the frequency of the station you want to listen to. In this case, you can simply enter the frequency directly using the number buttons on the remote control (this function is not available using the front panel controls of the receiver).
SOURCE |
|
| RECEIVER |
|
DVD | TV | VCR | 1 | |
| MULTI CONTROL |
| ||
RCV | CD | TUN | TVC |
|
1 | 2 | 3 |
|
MIDNIGHT | 5.1 / 7.1 | ATT | 4 |
4 | 5 | 6 | |
|
| EFFECT | |
7 | 8 | 9 | |
10 |
| DISC |
|
| 0 | ENTER |
|
| DTV INFO | MPX/RETURN | D.ACCESS | GUIDE | 3 |
2 | ¶ | 7 | 3 | 8 | |
BAND | CLASS | DTV ON/OFF | DTV MENU | ||
1 | ¡ | 4 | ¢ | ||
2/DTS | DSP | TEST TONE | SIGNAL SELECT |
|
CH SELECT CH LEVELFUNCTION
LOUDNESS FL DIMMER | SETUP | MUTING |
| TUNE |
ST | ST |
| ENTER |
| TUNE |
VOLUME | CHANNEL |
MASTER VOLUME |
1Press the MULTI CONTROL TUN button on the remote control.
On the receiver, use the MULTI JOG to select the tuner mode.
2Press the BAND button to select either FM or AM.
Each press switches the band between FM and AM. On the receiver, pressing the BAND button switches between bands.
3Press D.ACCESS (DIRECT ACCESS).
4Use the number buttons to enter the frequency of the radio station.
Example: To tune to 106.00 (FM), press 1 – 0 – 6 – 0 – 0
TUNED
SP A STEREO
MEMO:
•If you make a mistake while inputting the frequency, press the D.ACCESS button twice to cancel the frequency and start again.