Telex USR-100 operating instructions Bracket Mounting

Page 18

Remote mounting antennas will increase the effective reception range when appropriately positioned. The two 1/4 wave antennas supplied are not ground independent and therefore not appropriate for remote mounting. See the accessories section of this manual for remote- mountable antenna options.

The diversity antenna system operates most efficiently when the two antennas are separated as much as possible

The antennas should be mounted so that they are at least 6 feet (2 meters) apart for best results. They should be at least 2 feet (60 cm) from nearby objects.

Accessories for remote antenna mounting are listed in the back of this manual. See Figures 6 and 7 for suggested mounting options.

Bracket Mounting

The antenna brackets may be either mounted on mic stands or secured to some other object with the hardware provided.

Figure 6

Bracket Mounting

-15-

Image 18
Contents Telex Table of Contents Table of Contents General Information Posi Phase Diversity AntennasComputer Controlled Channels Audio Output PowerDisplays AudioUSR-100 Receiver Specifications Model SH-100 Transmitter Specifications Model LT-100 Transmitter Specifications Front Panel Rear Panel Receiver Set-up Antenna MountingBottom View SH-100 Battery Meter Set-UpMicrophone Connector wired as follows Top View Side View Back View LT-100Set-Up Antenna Placement System Set-UpBracket Mounting Antenna Placement with Accessory Brackets and Cables Antenna ConnectionInstalling Rack Mounts Assembly of Rack MountDouble Mounting Model CLA-X 1/2 Wave Antenna Model AB-2 Combination Antenna BracketFront Connector Mounting Kit Model ALP-450 450-900 MHz Directional Log Periodic AntennaOrder No FCC Information Customer Service Information June