Playing the SP-500
1.Playing a sound
First let’s turn on the power and play the keyboard to produce sound.
Turing the power on
As described in the connection procedure on p.14, connect the AC/AC power supply, head- phones, and pedal. Then turn on the power of the
1 | Turn on the power |
Leave the [VOLUME] slider set at about 0. |
Press the [POWER] switch located on the rear panel. When you turn on the power, the panel indicators will light, and the startup screen will appear.
Turning the power off
Press the [POWER] switch once again. When the power is turned off, the panel indica- tors will all go dark.
2 | Play the keyboard |
While playing the keyboard, gradually adjust the [VOLUME] slider to adjust the vol- |
ume.
If you are listening to the
Adjusting the volume
Raise the [MASTER VOLUME] slider to the middle position. Moving the slider toward the right will increase the volume, and moving it toward the left will decrease the volume. At a position of “0” there will be no sound.
While actually playing the instrument, adjust the volume to an appropriate level.
Softer | Louder |
Playing the
23