Korg Sp-500 manual Combining sounds, Layer function play two sounds together

3.Combining sounds

Layer function (play two sounds together)

This allows you to combine two programs to be played together when you play a single note. This is called the Layer function.

1	Press the [LAYER] switch
	The [LAYER] switch indicator will light, and the “Layer” page will appear.

A

	B
2	Select each sound
	To select the “Upp1” program, press cell A. To select the “Upp2” program, press cell B.

Then select the desired sound. ☞ p.24 “2. Selecting sounds”

Upp1

Upp2

If the Layer function is turned on, the total polyphony will be 32 notes. If a program such as “Grand piano 1” is selected, the polyphony will be 21 notes. ☞ p.73 “Trouble- shooting”

3

4

Adjust the volume balance of the two sounds

Use the dial or the [VALUE] switches to adjust the value of the “Vol” (volume) cell. The volume can be adjusted from 0 (minimum) – 127 (maximum).

Specify the octave of each sound

The pitch played by the keyboard can be adjusted for each program in one-octave steps.

Use the “Octave” cell “▲” or “▼” to set the value.

The octave can be adjusted over a range of –2, –1, 0, +1, +2.

26