Elation Professional 575E manual Mounting and Installation

Page 13

Design Spot 575E™

6. MOUNTING AND INSTALLATION

Cautions:

For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal.

Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device’s weight.

Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing the fixture.

Before taking into operation for the first time, the installation has to be approved by an expert.

When installing the device, make sure there is no highly inflammable material within a distance of min. 0,5m

Mounting

The DESIGN SPOT 575E™ is fully operational in two different mounting positions, hanging upside-down from a ceiling, or set on a flat level surface (see illustration on next page). Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.

Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE0711-217 for proper installation in Europe To ensure proper installation, only qualified staff should attempt installation.

©Elation Professional®	13
	Design Spot 575E™

Image 13

Contents Design Spot 575E Contents General Information Design Spot 575E Never open this fixture while in use Safety Instructions Design Spot 575E Features General Guidelines Safety Regulations Lamp Installation InstructionsInstallation Procedure Lamp Optimization OK No Design Spot 575E Mounting Mounting and InstallationClamp Mounting Mounting pointsSecuring the Design Spot 575E Understanding DMX DMX-512 connection with DMX terminator DMX-512 control connectionFixture DMX addressing Design Spot 575E Display LED Indicators A001~AXXX Fixture MenuDMX PAN Slave setting DMX address settingDisplay the DMX 512 value of each channel Music control Auto ProgramTime information Current time Machine on timeTemp. Info Clear lamp timeSoftware version Lamp on/offLamp on via external controller Automatic La-OnLamp off via external controller Lamp Off if no DMXFixture Settings Status settingController Settings Channel 3 to 164 256+164=420 RESET-FUNCTIONS Effect Adjust Design Spot 575E Operation DMX Channel Traits DMX channel function and values Channel 7 Magenta Color Wheel Channel 6 Cyan Color WheelChannel 8 Yellow Color Wheel Channel 9 Gobo Wheel 1 rotating gobosChannel 11 Gobo Wheel 2 Rotating gobos Channel 10 Gobo Wheel 1- Indexing, rotationChannel 12 Rotating gobo index, rotating gobo rotation Channel 13 3 facet rotating prism, Prism / Gobo macrosChannel 16 Shutter, strobe Channel 14 FocusChannel 17- Dimmer intensity Channel 18 IrisChannel 21 Speed Of CMY And Dimmer Channel 20 Animation Wheel, rotating fire wheelChannel 22 Color macros CMY and color wheel Channel 23 Speed pan/tilt movement Channel 24 Lamp on/off, reset, internal programsFuse Replacement Pan Er Error CodesTilt Er Magenta Color Er Cyan Color ErYellow Color Er Color ErPrism Rotation Er Gobo Rotation ErShutter, Strobe Er Focus ErIris Er Zoom ErFire Wheel Er Disconnect from mains before starting maintenance operation Cleaning and MaintenanceYear Limited Warranty Design Spot 575E Photometric Data Gobos Dimensional Drawings Circuit Schematic Optical system Technical SpecificationsElation Professional