Design Spot 575E™
9.2.2Access the main menu and select the AUDI function, this will give you access to the audio submenu. See page 16 for the menu breakdown.
9.2.3In the audio submenu choose the audio chase speed, fast or slow. Slow (ASLW) will trigger the chase sequence to every two beats, while fast (AFST) will trigger the chase impulse every beat. See page 16 for more details.
9.2.4Be sure the Master (MSTR) function is switched “ON,“ and the SVPT function is switched “OFF.“
9.2.5Choose your room size. The size function allows you to choose a the approximate size of the room (NORM, BIG, MIDL, SMAL). The
9.2.6Use the sound sensitivity knob on the side control panel to make the unit more or less sensative to sound. Turning the knob in clockwise direction will make the unit more sensetive to sound, while turning the knob
9.3
9.3.1Using standard XLR microphone cables, daisy chain your fixtures together via the XLR connector on the rear of the fixtures. Remember the Male XLR connector is the input and the Female XLR connector is the output. The first fixture in the chain (master) will use the female XLR connector only - The last fixture in the chain will use the male XLR connector only. For longer cable runs we suggest a terminator at the last fixture.
9.3.2Follow the same procedures listed in the previous
11.DMX CHANNEL TRAITS:
©Elation Professional® | 34 |
| Design Spot 575E™ |