Elation Professional 575E manual Clear lamp time, Temp. Info, Software version, Lamp on/off

Page 26

Design Spot 575E™

been running since it was last struck. This counter is automatically reset after every power-on.

Clear lamp time

This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at every lamp replacement. This procedure tracks the lamp running time so the lamp can be replaced at the end of it’s recommended duty cycle.

•Select “Clear lamp time” in the system menu.

•The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time.

•Press enter to confirm.

•Press the Mode/Esc-button to return to the main menu.

2.Temp. Info.

Base Temp – This function will display the base temperature of the fixture.

Inside head Temp – This function will display the head temperature of the fixture.

3.Software version

This function will display the current operating software version of the fixture.

•Select “Software Version” in the system menu.

•Press enter to confirm.

•The LCD will read “V-X.X”, “X.X” represents the version number, e.g. “V-1.0”, “V-2.6”.

•Use the UP and DOWN buttons to toggle through the software version of different IC’s.

•Press the Mode/Esc-button to return to the main menu.

LAMP CONTROL:

1. Lamp on/off

With this function you can switch the lamp on or off via the Control Board.

• Select "Lamp on/off" by turning the LCD controls.

©Elation Professional®	26
	Design Spot 575E™

Image 26

Contents Design Spot 575E Contents General Information Design Spot 575E Never open this fixture while in use Safety Instructions Design Spot 575E Features General Guidelines Installation Procedure Lamp Installation InstructionsSafety Regulations OK No Lamp OptimizationDesign Spot 575E Mounting and Installation MountingMounting points Clamp MountingSecuring the Design Spot 575E Understanding DMX DMX-512 control connection DMX-512 connection with DMX terminatorFixture DMX addressing Design Spot 575E Display LED Indicators Fixture Menu A001~AXXXDMX PAN Display the DMX 512 value of each channel DMX address settingSlave setting Time information Current time Auto ProgramMusic control Machine on timeSoftware version Clear lamp timeTemp. Info Lamp on/offLamp off via external controller Automatic La-OnLamp on via external controller Lamp Off if no DMXController Settings Status settingFixture Settings Channel 3 to 164 256+164=420 RESET-FUNCTIONS Effect Adjust Design Spot 575E Operation DMX Channel Traits DMX channel function and values Channel 8 Yellow Color Wheel Channel 6 Cyan Color WheelChannel 7 Magenta Color Wheel Channel 9 Gobo Wheel 1 rotating gobosChannel 12 Rotating gobo index, rotating gobo rotation Channel 10 Gobo Wheel 1- Indexing, rotationChannel 11 Gobo Wheel 2 Rotating gobos Channel 13 3 facet rotating prism, Prism / Gobo macrosChannel 17- Dimmer intensity Channel 14 FocusChannel 16 Shutter, strobe Channel 18 IrisChannel 22 Color macros CMY and color wheel Channel 20 Animation Wheel, rotating fire wheelChannel 21 Speed Of CMY And Dimmer Channel 24 Lamp on/off, reset, internal programs Channel 23 Speed pan/tilt movementFuse Replacement Tilt Er Error CodesPan Er Yellow Color Er Cyan Color ErMagenta Color Er Color ErShutter, Strobe Er Gobo Rotation ErPrism Rotation Er Focus ErFire Wheel Er Zoom ErIris Er Cleaning and Maintenance Disconnect from mains before starting maintenance operationYear Limited Warranty Design Spot 575E Photometric Data Gobos Dimensional Drawings Circuit Schematic Technical Specifications Optical systemElation Professional