Elation Professional 575E manual Fixture Menu, A001~AXXX

Design Spot 575E™

9. FIXTURE MENU

On-Board System Menu: The DESIGN SPOT 575E™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu.

LCD Control Panel: The control panel located on the side of the fixture allows you to access the main menu and make necessary adjustments to the Design Spot 575E™. During normal operation, tapping the “MODE/ESC” key once will access the fixture’s main menu. Once in the main menu you can navigate through the different functions and access the sub-menus with the Up and Down buttons. Once you reach a field that requires adjusting, tap the ENTER button to activate that field and use the UP and Down button to adjust the field. Tapping the Enter button once more will confirm your setting. You may exit the main menu at any time without making any adjustments by tapping the MODE/ESC button.

Mode		Set DMX Address		A001~AXXX					DMX address setting
		Value Display		PAN Moving…					DMX value display
Function		Set To Slave		Slave1, Slave2, Slave3					Slave setting
		Auto Program		Master / Alone					Auto program
		Music Control		Master / Alone					Music control
		Time	Current Time		XXXX (Hours)				Total power run time
		Information	Total Run Time		XXXX (Hours)				Fixture running time
			Total Lamp Time		XXXX (Hours)				Lamp running time
			Lamp Off Time		XXXX (Minute)				Lamp off time
Information
			Clear Lamp Time		ON/	OFF			Reset lamp time
		Temperature	Base Temperature		XX		/		Base temperature
		Info							display
			Head Temperature		XXX		/		Head temperature
									display
		Software	Ver1.0						Display will readout
		Version							current firmware version
	©Elation Professional®							21
				Design Spot 575E™