SoundCraft 1603, 1605 manual Warranty

Page 31

WARRANTY

1Soundcraft is a trading division of Harman International Industries Ltd.

End User means the person who first puts the equipment into regular operation.

Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor.

Equipment means the equipment supplied with this manual.

2If within the period of twelve months from the date of delivery of the Equipment to the End User it shall prove defective by reason only of faulty materials and/or workmanship to such an extent that the effectiveness and/or usability thereof is materially affected the Equipment or the defective compo- nent should be returned to the Dealer or to Soundcraft and subject to the following conditions the Dealer or Soundcraft will repair or replace the defective components. Any components replaced will become the property of Soundcraft.

3Any Equipment or component returned will be at the risk of the End User whilst in transit (both to and from the Dealer or Soundcraft) and postage must be prepaid.

4This warranty shall only be available if:

a)the Equipment has been properly installed in accordance with instructions contained in Soundcraft's manual; and

b)the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing; and

c)no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts maintenance adjustments or repairs to the Equipment; and

d)the End User has used the Equipment only for such purposes as Soundcraft recommends, with only such operating supplies as meet Soundcraft's specifications and otherwise in all respects in accordance Soundcraft's recommendations.

5Defects arising as a result of the following are not covered by this Warranty: faulty or negligent handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God, neglect, deficiency in electrical power, air-conditioning or humidity control.

6.The benefit of this Warranty may not be assigned by the End User.

7.End Users who are consumers should note their rights under this Warranty are in addition to and do not affect any other rights to which they may be entitled against the seller of the Equipment.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Music Mixer User Guide Potters BAR Contents Important Safety Instructions Green and Yellow US Green/Yellow Recommended Headphone Impedance = 200 Ohms Safety Symbol GuideWelcome IntroductionGeneral Precautions InstallationMains Installation Audio Wiring Initial Wiring ConsiderationsShielding Working Safely with Sound Points to RememberRecommended Headphone Impedance = 200 Ohms Unpacking and Inspection Inspection and InstallationRemoving The Top Panel Fascia Making Adjustments and Fitting SparesRemoving The Fader Panel Replacing The Channel Faders Replaceable Spares Part NumbersReplacing The Cross- Fader Enabling the External Mute Feature Moving the Rear Connector PanelRepositioning the Rack Ears Connecting to a Typical Sound System Block Diagram Page MIC / DJ Channel Using the ConsoleDJ Channel 1 Rear Panel Connectors Mid Band Pass Filter Master/B SwitchPhono/Line High Pass FilterMic XLR Channels 2-7 2-4 on 1603 Rear Panel ConnectorsGround Point Master Section Aux Send/Return MetersMaster Headphones BoothXF Curve External Mute Operation Input and Output Levels SpecificationsRear Panel Connector connections Master/Booth OutputNoise Dimensions/ weightMono Output Effects Loop OutputPost after the channel fader GlossaryEqualising the system to notch out the offending frequencies Riaa Warranty

1605, 1603 specifications

The SoundCraft 1603 and 1605 are renowned analog mixing consoles well-regarded in both live sound environments and studio settings. These mixers offer exceptional sound quality coupled with intuitive operation, making them a popular choice among audio engineers and musicians alike.

The SoundCraft 1603 is a 16-channel mixer featuring 3 buses, while the 1605 amplifies this with 16 channels and 5 buses, providing increased routing flexibility. Each channel is equipped with a high-quality microphone preamplifier, which delivers a warm, rich sound. The preamps feature a low-cut filter that aids in eliminating unwanted low-frequency noise, further enhancing audio clarity.

Both models come with an integrated 3-band EQ on each channel, complete with adjustable high, mid, and low frequencies. This allows for precise tone shaping, enabling users to sculpt their sound to fit various musical styles and requirements. The mid-band also features a sweepable frequency, providing the ability to target specific problematic frequencies in live settings, enhancing the overall mix.

Advanced technologies implemented within these consoles include the use of internal components that reduce noise levels and improve overall audio fidelity. The mixers are designed with ruggedness in mind, ensuring they withstand the rigors of live performance while providing the reliability necessary for studio applications.

Additional features that stand out include a range of auxiliary sends, allowing for flexible routing options for effects and monitor mixes. The mixers also support phantom power, making them ideal for use with condenser microphones. The user-friendly layout ensures quick access to all controls, allowing engineers to focus on mixing without unnecessary distractions.

Another key aspect is the mixer’s compact design, making it suitable for small venues, mobile setups, and studio environments where space is a premium. The sturdy construction and high-quality components ensure longevity, a significant advantage for professionals who rely on consistency in their equipment.

In summary, the SoundCraft 1603 and 1605 mixing consoles are excellent choices for those seeking high performance in a compact and user-friendly package. Their combination of advanced features, reliability, and sound quality has established them as essential tools for anyone serious about audio production and live sound reinforcement. Whether in a studio or on stage, these mixers deliver on all fronts, ensuring an exceptional experience for both the engineer and the audience.
Top Page Image Contents