SoundCraft 1603, 1605 manual Green and Yellow US Green/Yellow

Page 5

Note: It is recommended that all maintenance and service on the product should be carried out by Soundcraft or its authorised agents. Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorised personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths, curtains etc.

THIS APPARATUS MUST BE EARTHED. Under no circumstances should the safety earth be disconnected from the mains lead.

The mains supply disconnect device is the mains plug. It must remain accessible so as to be readily operable when the apparatus is in use.

If any part of the mains cord set is damaged, the complete cord set should be replaced. The following information is for reference only.

The wires in the mains lead are coloured in accordance with the following code:

Earth (Ground):

Green and Yellow (US - Green/Yellow)

Neutral:

Blue (US - White)

Live (Hot):

Brown (US - Black)

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol.

The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N

The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L

Ensure that these colour codes are followed carefully in the event of the plug being changed

This unit is capable of operating over a range of mains voltages as marked on the rear panel.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Music Mixer User Guide Potters BAR Contents Important Safety Instructions Green and Yellow US Green/Yellow Recommended Headphone Impedance = 200 Ohms Safety Symbol GuideWelcome IntroductionMains Installation InstallationGeneral Precautions Shielding Initial Wiring ConsiderationsAudio Wiring Recommended Headphone Impedance = 200 Ohms Points to RememberWorking Safely with Sound Unpacking and Inspection Inspection and InstallationRemoving The Fader Panel Making Adjustments and Fitting SparesRemoving The Top Panel Fascia Replacing The Cross- Fader Replaceable Spares Part NumbersReplacing The Channel Faders Repositioning the Rack Ears Moving the Rear Connector PanelEnabling the External Mute Feature Connecting to a Typical Sound System Block Diagram Page MIC / DJ Channel Using the ConsoleDJ Channel 1 Rear Panel Connectors Phono/Line Master/B SwitchHigh Pass Filter Mid Band Pass FilterGround Point Channels 2-7 2-4 on 1603 Rear Panel ConnectorsMic XLR Master Section Master MetersAux Send/Return XF Curve BoothHeadphones External Mute Operation Rear Panel Connector connections SpecificationsMaster/Booth Output Input and Output LevelsMono Output Dimensions/ weightEffects Loop Output NoisePost after the channel fader GlossaryEqualising the system to notch out the offending frequencies Riaa Warranty

1605, 1603 specifications

The SoundCraft 1603 and 1605 are renowned analog mixing consoles well-regarded in both live sound environments and studio settings. These mixers offer exceptional sound quality coupled with intuitive operation, making them a popular choice among audio engineers and musicians alike.

The SoundCraft 1603 is a 16-channel mixer featuring 3 buses, while the 1605 amplifies this with 16 channels and 5 buses, providing increased routing flexibility. Each channel is equipped with a high-quality microphone preamplifier, which delivers a warm, rich sound. The preamps feature a low-cut filter that aids in eliminating unwanted low-frequency noise, further enhancing audio clarity.

Both models come with an integrated 3-band EQ on each channel, complete with adjustable high, mid, and low frequencies. This allows for precise tone shaping, enabling users to sculpt their sound to fit various musical styles and requirements. The mid-band also features a sweepable frequency, providing the ability to target specific problematic frequencies in live settings, enhancing the overall mix.

Advanced technologies implemented within these consoles include the use of internal components that reduce noise levels and improve overall audio fidelity. The mixers are designed with ruggedness in mind, ensuring they withstand the rigors of live performance while providing the reliability necessary for studio applications.

Additional features that stand out include a range of auxiliary sends, allowing for flexible routing options for effects and monitor mixes. The mixers also support phantom power, making them ideal for use with condenser microphones. The user-friendly layout ensures quick access to all controls, allowing engineers to focus on mixing without unnecessary distractions.

Another key aspect is the mixer’s compact design, making it suitable for small venues, mobile setups, and studio environments where space is a premium. The sturdy construction and high-quality components ensure longevity, a significant advantage for professionals who rely on consistency in their equipment.

In summary, the SoundCraft 1603 and 1605 mixing consoles are excellent choices for those seeking high performance in a compact and user-friendly package. Their combination of advanced features, reliability, and sound quality has established them as essential tools for anyone serious about audio production and live sound reinforcement. Whether in a studio or on stage, these mixers deliver on all fronts, ensuring an exceptional experience for both the engineer and the audience.
Top Page Image Contents