Warranty & Notices
i
WARRANTY
ICP PANEL-TEC, INC. warrants that all equipment purchased hereunder is warranted on a “RETURN
TO FACTORY” basis against all defects in workmanship and materials under normal and proper use and
service in its unmodified condition for a period of one (1) year from the date of initial shipment. ICP
PANEL-TEC, INC. sole obligation under this warranty shall be limited to furnishing parts and labor to
remedy such defects; either, at the option of ICP PANEL-TEC, INC., by replacing or repairing any
defective parts which are returned to ICP PANEL-TEC, INC. factory or by making available at a
purchaser designated facility a repaired or replaced part. All replaced equipment shall become the
property of ICP PANEL-TEC, INC. The cost of freight to and from ICP PANEL-TEC, INC. will be
borne by the purchaser. If ICP PANEL-TEC, INC. determines that the equipment returned to it for
warranty correction is not defective, as herein defined, Purchaser shall pay ICP PANEL-TEC, INC., all
costs of service, parts, handling and transportation.
IMPORTANT NOTICES
By accepting and using the DN-3000 (s) CONFIGURATION EDITOR SOFTWARE and information
proprietary to ICP PANEL-TEC, INC. USA and/or its Licensers, you agree that such software and
information (Software) constitutes valuable trade secrets and proprietary information of ICP PANEL-
TEC, INC. and/or its Licenses and that you hold the software in confidence and secrecy and shall not, in
whole or part, copy or disclose to any third party or make any unauthorized use thereof. Authorized use
shall be limited to the DN-3000 (s) upon which the Software is initially supplied. You further agree that
this agreement shall insure to the benefit of ICP PANEL-TEC, INC. and any third party holding any
right, title, or interest in the software, or any software and information from which it is derived, and their
respective transferees, successors, and assigns, and that any subsequent transferee of the unit herein
decried shall be obligated to the same terms of this agreement.
This document is based on information available at the time of its publication. While efforts have been
made to render accuracy to its content, the information contained herein does not purport to cover all
details or variations in hardware or software, nor to provide for every possible contingency in connection
with installation, operation, and maintenance.
Features may be decried herein which are not present in all hardware and software systems. ICP
PANEL-TEC, INC. assumes no obligation of notice to holders of this document with respect to changes
subsequently made.
ICP PANEL-TEC, INC. makes no representation or warranty expressed, implied, or statutory, with
respect to, and assumes no responsibility for accuracy, completeness, sufficiency or usefulness of the
information contained herein.
In no event shall ICP PANEL-TEC, INC. be responsible or liable for indirect or consequential damages
that may result from installation or use of this equipment.
(C) 1997 ICP PANEL-TEC, INC.
ALL RIGHTS RESERVED
Post Office Box 2394
Huntsville, Al. 35804-2394