ICP DAS USA DB25, 100-700 PLCS, DN-3000 user manual Output Data Table

DeviceNet to Motor Drives

OUTPUT DATA TABLE

Within the “I/O Data Configuration” screen, use the DOWN arrow key to move the focus to the Output Data button and press the ENTER key. This action opens the Output Data Table setup screen to allow you to set up the motor drive parameters to be mapped to each word of Output data.

Output data is data received by the DN-3000 from the DeviceNet Host to be written to motor drive parameters. Each word of Output data (except those reserved for the Command Block) can be mapped to specific motor drive parameters. Output data is only written to motor drive parameters when that data changes.

Use the UP/DOWN arrow keys to scroll through the list of Output data words until the highlight bar is over the Output word you wish to edit, and press ENTER. A window will open allowing you to edit the Motor Drive Address and Parameter Number mapped to that Output word.

33