Descriptions and Functions, Front Panel

Descriptions and Functions

�

Front Panel

��

1.TNC Antenna Connection - Connect the included antennas to both terminals by twisting clockwise. To remove the antennas, unscrew the connectors counter-clockwise.

2.UHF Modules - See page 14.

3.Microphone Channel Input and Effect Controls- See page 17 for more detail.

4.Master Effects Controls - Control the level of the effects on microphone ouput with EFFECTS knob. Turn clockwise to increase effects, counter-clockwise to decrease.

Delay Knob - This control adjusts the length of time for each ECHO interval, or REPEAT. Rotating the DELAY control clockwise will increase the DELAY, creating the effect of more “space.”

Repeat Knob - This control adjusts the number of ECHO repeats applied to the signal until the effect decays, or fades out.

5.Master Level Controls - Control the volume output of all audio with the MASTER knob, adjust the output of the DISC PLAYER or connected AUX player with the DVD/AUX knob. Turn clockwise to increase volume, counter-clockwise to decrease.

6.LED Level Indicator - This indicator will allow you to monitor the decibal levels of the audio output, making it easier to avoid peak distortion.

7.Individual Component Power Swtiches - Use these switches to power off the DISC PLAYER or UHF MODULES when they are not in use. The POWER button controls power for the entire unit.

8.Graphic Equalizer Control - This GRAPHIC EQ is used to BOOST and/or CUT particular frequencies from SOURCE MUSIC output. Each slide fader process’ a particular frequency range indicated by the number above it. Frequencies from 63Hz - 150Hz constitute the very low to low range. Frequencies from 150Hz to 2.5kHz are the mid-range and frequencies from 2.5kHz to 15kHz make up the high to very high range. To adjust slide the fader up to boost the frequency presence and down to cut the frequency presence.

9.Multi-Format Disc/USB Player - See page 15.

10.AUX Input - Connect an additional media player or any output device to the RCA audio inputs.

11.REC Output - Output the audio signal from the PA-MAN for monitoring or recording purposes.

12.XLR L/R Line Outputs - Output the PA-MAN audio through stereo XLR connections to an input device.

Note: Output level controlled by the master volume control.