VocoPro PA-MAN owner manual Digital Setup

Setting Up Preferences, cont.

The following modes are accessible but not enabled on the PA-MAN. The DVD Decoder used in the PA MAN is standard and not specialized for this unit.

Speaker Setup

1. Downmix

LT / RT: When connecting to a Dolby Digital amplifier.

STEREO: When connecting to a stereo TV or amplifier and the disc supports 2-channel output.

VSS: When using a disc that has been formatted with Virtual Surround Sound.

Digital Setup

1. OP Mode

LINE OUT: This is the standard Digital Output setting.

RF REMOD: When primarily using headphones.

2. Dynamic Range

This selects the Line Out ratio.

NOTE: This can only be used when LINE OUT is chosen in the OP MODE options.

FULL: The audio signal peak value will be the minimum

OFF: The audio signal peak value will be the maximum.

3. Dual Mono

Here you can choose between STEREO, L-MONO, R-MONO, or MIX-MONO output modes. It is usually recommended that you stay in STEREO mode for best results.

28