VocoPro PA-MAN owner manual Setting Up Preferences, System Setup

Widescreen TV set

Setting Up Preferences

Press SETUP on the remote control to get into the SETUP menus. All settings have been preset in the DEFAULT mode. This means that the most common settings will already be active when you first setup the PA-MAN. It may not be necessary to make any changes for the PA-MAN to work correctly.

To exit the SETUP screen simply press SETUP on your remote or scroll down to EXIT SETUP on the MENU MAIN PAGE and press ENTER on your remote.

System Setup

Press SETUP on the remote control and be sure that SYSTEM SETUP is highlighted.

1. Tv System

Set the PA-MAN’s output to match your TV set’s system format. For example, NTSC for North American TV systems or PAL for European systems. Select AUTO if you frequently switch between PAL and NTSC modes.

2. Screen Saver

When there is no disc or the player is idle for a period of time, screen saver will appear if this setting is ON. Using a screensaver can help protect your TV or monitor’s screen.

3. Video

Choose the video mode based on what video connection you are using. NOTE: The PA-MAN only has one video output, this feature is not enabled on the PA-MAN.

4. TV Type

TV Display Modes: You can select one of the following TV display modes for the video output:

4:3/PS: When the player is connected to a normal (4:3) TV and a wide picture is shown on the full screen, a portion may be cut off automatically.

4:3/LB: When the player is connected to a normal TV and a wide picture is shown on the screen, black strips appear at the top and bottom of the screen.

16:9: When the player is connected to a wide screen TV. NOTE: If you choose this setting and you don’t have a wide screen TV, the images on the screen may appear distorted

due to vertical compression.	To view the standard	4:3 subtitle block to	16:9 To view widescreen
	4:3 picture or the cut	view the full width of	picture with a
	standard 4:3 picture	the widescreen mode	widescreen TV set

5. Password

Enter your password here, to access parental controls. The first time you use this funtion, you will have to input the factory- set password which is “0000” and then press enter. You may then input your own password and then press enter again. Be sure that you write down your new password as the factory-set “0000” will not work if you have changed it.

Standard TV set

6. Rating

Parents can control the rating of movie that can be shown on the player. Simply select the rating from the list and then press enter. The LOCK ICON in the password menu must be unlocked to change the rating.

7. Default

Choosing RESTORE, restores the PA-MAN’s preferences to the original factory settings.

8. Exit Setup

Exit the setup menu and return to the playback screen.

26